1100 mah battery sufficant for dripping?

[fergus77]

Purchased the Intro-Vision kit from VapeEscape and while the clearomiser is great, i want to try dripping and play around with some flavors.

Is there enough juice in the battery to fit a LR Atomizer and get good results,or should i just stick with a standard resistance Atty?

 

[Mark]

You'll be fine. I think with LR atomisers the usual advice is don't go below 400 mAh

 

[fergus77]

Sweet, thanks Mark

Time to spend more money and get even more juice and bits!

 

[Ace Vapers]

Yep low resistance atty will be fine. It will give you the best vapour and flavour on that sort of battery. You will feel as if you are vaping at higher voltages.

 

[Robzki]

I use my pheonix SS coiled to lr on a 1000mah and it works great

 

[AnnaLaw]

I find LR best for dripping with fixed volt batteries anywhere from 650 maH and get the best flavour that way. But it's not worth going for LR with a lavatube because they won't go above 2.5 amps. I have one and a 1.2 ohm coil and worked out I get more from an ego battery, lavatube won't go above 3 volt no matter what it shows with that resistance.
I drip with an ordinary bridgeless LR atty on a 650 maH ego if I want lots of warm vapour and plenty of flavour. It's definately worth it and with even that capacity doesn't run the battery down too fast.