3D Printed 10ml Juice Rack feedback

[Vapaneezer Scrooge]

Decided to design some new stuff and I wanted to design a small tabletop juice rack for my nic salts and thought perhaps others might be interested?

So far I've come up with the following idea, 2 tier with 5 bottles per tier (10 total) using 2 end plates with bamboo skewer sticks as the supports making it simple and cheap to make and ship.

I'm at the draft stage but feedback would be welcome at this point please.

I will see how it goes, I will either sell some kits or put the files up for free if anyone's got or has access to a 3D printer.

 

[Vapaneezer Scrooge]

This was my inside cupboard door version, the sticks were garden plant sticks but the thinner bamboo will look better.
(Forgive the tatty looks and holes as it was just a prototype)

 

[rew]

This was my inside cupboard door version, the sticks were garden plant sticks but the thinner bamboo will look better.
(Forgive the tatty looks and holes as it was just a prototype)

View attachment 214269

Might well be interested in something like that. Watching to see what you come up with

 

[RAPTOREX]

This was my inside cupboard door version, the sticks were garden plant sticks but the thinner bamboo will look better.
(Forgive the tatty looks and holes as it was just a prototype)

View attachment 214269

I'm not really a 10ml, man. But one for 50/60mls and another for 100/120mls, say three 100/120@ and 4or 5 50/60s wide would be very interesting.

 

[flearider]

most if not all mine are 100ml .. well bought ones are 50 ml so say 80% are 100ml ..
no point making smaller .. and no point buying smaller works out really expensive

 

[Vapaneezer Scrooge]

Made the prototype and fit for purpose, definitely not a marketable idea due to a 4 hour print time.

If anyone wants the free STL file to print their own give me a shout.

 

[pills]

I'd love a decent rack for my 60ml bottles.

 

[Vapaneezer Scrooge]

I thought about a shortfill version but the bottles I have vary a fair bit in size, 100ml, 50ml thin, fat, DIY bottles etc. so it would be harder to strike a balance, what would be the most common size (diameter)?

I bought some 3mm Aluminium bar at B&Q a while ago that I could use for a prototype

 

[Richard Winter]

I thought about a shortfill version but the bottles I have vary a fair bit in size, 100ml, 50ml thin, fat, DIY bottles etc. so it would be harder to strike a balance, what would be the most common size (diameter)?

I bought some 3mm Aluminium bar at B&Q a while ago that I could use for a prototype

Good looking rack mate, well done