I am Really struggling to get my head around the coil difference, and as for burning them out
I have been through so many coils while learning. I'm currently preferring the 1.6ohm I think. But VERY new. Wondering which would be best for DTL in the zenith 11 tank.
Zenith II Tank
https://www.innokin.com/zenith-ii
coils
https://www.vapeclub.co.uk/vape-coils/innokin/zenith
these are the various coils
0.3 Ohm Z Coil: 30 - 40W (70% VG e-liquid and high VG e-liquid)
0.8 Ohm Coil: 15 - 18W (50/50 and high PG e-liquid)
1.0 Ohm Z Coil: 20 - 25W (60% VG e-liquid)
1.2 Ohm Coil: 10 - 14W (50/50 and high PG e-liquid)
1.6 Ohm Coil: 10 - 14W (50/50 and high PG e-liquid)
ive not used this tank so hopefully this is all correct below.
MTL mouth to lung is similar style to smoking. its a tighter draw and you inhale into mouth then take down to lungs.
this style uses low wattage and higher ohm coils like 1.6ohm 1.2ohm and is best with (50vg/50pg) liquid.
RDTL restricted direct to lung (i guess) is a little loser on the inhale. it uses slightly higher wattage and uses coils like the 1ohm with medium wattage.
DTL direct to lung is a loser inhale. this is a different style to smoking where you inhale directly into your lungs. this uses the highest wattage for these coils like the 0.3ohm and is best with thicker juice (70vg) which makes much more clouds.
with any coil you need to break them in first and not go straight to the highest wattage as this is the easiest way to burn a coil out.
drip some juice on the cotton around the coil. put in tank and fill up. then start low. if you are using the 1.6 coil then start on 8watts and take a few puffs then turn up 1 watt every few puffs. this will bed in the coil and make it last longer.
