Building my own coils?

[B16andy]

I need some information about making coils (or whatever there called lol, I'm currently using the "totally wicked" coils at 2.4 ohms but there prices are a bit high so I thought I'd try making my own I have found a website here advertising mod parts etc but don't know what resistance wire and Wick to get? The website is stealth vapers and under the category rebuild able supplies . Any advice would be excellent as I don't know which one to buy.
Thanks

 

[u8myufo]

Some 0.20mm Kanthal and some 2mm Silica wick should do you for starters, I stand to be corrected though. Do you have a means of testing the resistance of the coils once you have built them and before using them in your miser or tank?

 

[cliffo]

What device and atty combination are you using at the moment ,

can't go wrong with stealthvape , great vendor ..

 

[Phantom Diablo]

depends on your coils you are doing. for an RSST or similar i use 400 SS mesh and i have both 0.32 Kanthal and 0.34 ribbon kanthal.
the .032 gives me a 2.1 ohm with 4 coils the ribbon gves me a nice 1.2 ohms . i get mine from the meshcompany .. very very cheap and great quality

 

[B16andy]

I've got a multimeter for ttesting the resistance once built

At the moment Ive got a ego t 1100mah battery (I think) and a matching tornado mini 1.6 atty

 

[u8myufo]

I've got a tornado mini 1.6 atty

As per my reply then Andy.

 

[B16andy]

Thanks for that guys! I'll get ordering