Clickfet vape experience different than mech?

[Dozwold]

Hi. Before I spend my hard earned cash and wait a good while for a bespoke mod to be made for me, does anyone have real world experience of the vape experience with and without a clickfet? Does a mech with a clickfet have any voltage drops and does it feel more like a true mech hit or a more like a wattage/regulated hit? The specs I’m looking for are dual 21700 in parallel (up to 52 amps per vape to get the full effect) and for samsung 30Ts so can also use my 0.08 builds. I’m not happy with how the normal regulated such as my DNA hits my 0.08, and have experienced a wonderful vape experience from a true parallel mech, so it’s really about what a clickfet would do vs a true mech vape experience?

 

[Deleted member 54254]

See the link for functionality... others might be slightly different. I'd suggest talking to @vapesmarter about them as he's done quite a few.

http://www.modmaker.co.uk/MM-ClickFet-v1

 

[Jon The Vape]

What was the parallel mech you used.

 

[nwhornet]

A cllickfet or mosfet will fail quicker constantly being used with such high amps.
Have you considered a Hog or Titan mod with a series build. You'd have 8.4v to whack through your coils although you'd be building higher ohms, nothing less than 0.4 to be sure of still having a lung. Will hit harder than any mech with a low ohm build.

 

[Jon The Vape]

Have you tried Malaysian nic salts 35 mg sub ohm. Should hit the spot without pushing your batteries too hard.

 

[Dozwold]

What was the parallel mech you used.

Hi Jon, the one my mate gave me to try was the exile dual 21700. It vaped really really well with a n90 alien coil at 0.08 dual (built by Psykobuilds) and with twin 30Ts, but has no squonker of course and also did not like how it’s hard to open and close each batteries with the screw in, for a mech I much prefer a quick battery release (just in case) let alone the ease when I switch batteries multiple times a day to get strongest vape.. I also simply don’t like dripping as always forget and get dry hits, so if it had a squonker AND easy release bottom, boy I would rush to buy it myself, even at £200.

 

[Dozwold]

A cllickfet or mosfet will fail quicker constantly being used with such high amps.
Have you considered a Hog or Titan mod with a series build. You'd have 8.4v to whack through your coils although you'd be building higher ohms, nothing less than 0.4 to be sure of still having a lung. Will hit harder than any mech with a low ohm build.

I haven’t tried true mech series yet to be fair I don’t want the expense (what if I don’t like it as serious may be a bogey hot vape?) because usually I like mech because it simply hits hard (with right n90 build) but actually the vape doesn’t seem to get as hot as a regulated vape when you have to turn up the wattage to get a similar hard hit.

 

[stuartd]

If your talking about the modmaker clickfet it won't run a 0.08 ohm build as it's too low for the low resistance protection built in the board and the board amp limit is only 46.6a

Here is the info from mm site

http://www.modmaker.co.uk/MM-ClickFet-v1

 

[mosfetius]

Yeah you want something with a higher amperage capability, I designed the switchfet and even I wouldn't use the single Fet on 21700 parralel, unfortunately there's many "modders" out there that don't understand the components that they are using and they are effectively just solder hands,

Here's a board I designed for a 3x21700 mod am building just for reference