Review converter for anyvape from standard coil to aspire bdc

[jeebus333]

i saw a review for these converters to make the original anyvape take the new bdc
after getting it heres my thoughts

once fitted new adapter and gromett fitted new aspire bdc and filled tank when i screwed the tank to my mod there was a click and i found that the coil had popped out and was loose, after refitting found that if you put any pressure on the coil from below it pops out of the threads tried all 5 coils same thing
if you fit the coil in tank when screwed to mod it pops out but still works, but if you remove the bottom to fill tank coil falls out. it stays in if you dont tighten it but then tank is loose and wobbles and the post which contacts with mod can be pulled out very easily. these aspire coils seem poorly put together i wont use them again.
when it does work its really bad constant dry/burnt hits on all liquids i tried.
i would not recomend this adapter and will be sticking to the old style coils
if you want bdc by newer tanks that are made for these coils.
this is my personnel opinion only for what its worth.

1.8ohm coils tried at various watts still no good

 

[madpiano]

are you using the Nautilus coils or the vanilla BDc? Sounds like you might have to use the Nautilus coils, which are slightly bigger

 

[jeebus333]

the set is put together to convert anyvape to take aspire dual coils, there is not enough thread on the coil to grip properly so any pressure on the bottom post makes the coil pop out of the threads,
i have 3 anyvapes and it happens on all of them.
i will stick to the old coils as they work great just thought these would be better for vape production, but my aga t2 is producing tons of vaper so probably wont go back to those style tanks away.

 

[madpiano]

The Nautilus also uses Aspire Dual coils, just slightly different ones. If you know someone who has a Nautilus might be worth a try.

Sent from my Nexus 5 using Planet of the Vapes mobile app

 

[jeebus333]

i have to review my review after fitting the adapter to another anyvape tank the coil no longer pops out and the burnt taste has gone. looks like the bottom connection on 1 of my anyvapes is dodgy
i have been using it for about 1 week now and it works fine as long as your juice is 70/30 any higher vg than 30 causes a burnt taste as coils cant get juice quick enough.
i will change my original conclussion to recommended

 

[Lisafosc]

I think this is the adapter I have paired with an aerotank airflow adapter, and put on my Protank 2, works very well.


Sent from my iPhone using Planet of the Vapes

 

[Elegant Vapour]

I think this is the adapter I have paired with an aerotank airflow adapter, and put on my Protank 2, works very well.


Sent from my iPhone using Planet of the Vapes

I have the same set-up with a Davide tank and it works a treat.

 

[vivd]

i now used the anyvape fitted with the nature vape coils, imo these are the best ready to use coils on the market
stunning flava and vaper, until my magma rda arrives these are my go to coils from now on.
thumbs up for nature vape