escape2vapour
Postman
- Joined
- Jun 8, 2015
- Messages
- 120
Council Of Vapor Colt Volt 80w Mod - £43.99
Council Of Vapor Colt Volt 80w Mod
The Colt Volt by Council of Vapor is an 80.0 watt device with temperature control mechanics that fits comfortably in the palm of your hand. This ergonomically designed device utilizes an internal 2150mAh battery that incorporates rapid-charging via the included micro USB.
The COV Colt Volt can also be fired in three different “ramp” modes that allow for further customization of your vaping experience. The three modes are: SO (Soft), ST (Standard), and PO (Power) and can read atomizers as low as 0.1 ohm in power firing modes. In TC mode the mod can read as low as 0.1 ohm
The Colt Volt 80W has a 0.96″ OLED display that is exceptionally bright so you can always see what’s going on with the device, even on the brightest of days. The body of the mod has aesthetically pleasing carbon fiber inlays that provide a balanced and elegant look.
Product Specifications:
Council Of Vapor Colt Volt 80w Mod
The Colt Volt by Council of Vapor is an 80.0 watt device with temperature control mechanics that fits comfortably in the palm of your hand. This ergonomically designed device utilizes an internal 2150mAh battery that incorporates rapid-charging via the included micro USB.
The COV Colt Volt can also be fired in three different “ramp” modes that allow for further customization of your vaping experience. The three modes are: SO (Soft), ST (Standard), and PO (Power) and can read atomizers as low as 0.1 ohm in power firing modes. In TC mode the mod can read as low as 0.1 ohm
The Colt Volt 80W has a 0.96″ OLED display that is exceptionally bright so you can always see what’s going on with the device, even on the brightest of days. The body of the mod has aesthetically pleasing carbon fiber inlays that provide a balanced and elegant look.
Product Specifications:
- Dimensions: 25.6mm x 36.5mm x 77.5mm
- Output wattage range: 1.0 – 80.0 watts
- Output voltage range: 0.5 – 8.5 volts
- Rapid-charge via included micro USB; circuitry of the device allows for quick charging of the device
- Powered by an internal 2150mAh battery
- TC functionality for the following firing modes: Ni200 Nickel, Ti Titanium, and SS Stainless steel
- Minimum atomizer resistance (power mode): 0.1 ohm
- Minimum atomizer resistance (TC modes): 0.08 ohm
- Bright 0.96″ OLED display
- Three optional firing modes: Soft, Standard, and Power
- Memory options which allow the user to quickly switch between preset settings
- Spring loaded 510 pin for easily switching between atomizers
