Crown RBA, what is the best build?

[krish123]

Hi Guys,

Recently got the crown tank aswell as the RBA deck for it. I tried out the RBA deck using the stock coil and was impressed.

Must of wicked it correctly as no issues with flooding or dry hits so was happy with that as it was my first time wicking.

Once I use the stock coils in the RBA deck and the ones from my tank I will build my own.

So my question is, what is the best build for this deck ?

What gauge wire would I need? I would like to use this in temp mode so guessing some nickel wire will be best?

Also I want to buy a build kit to make things easier aswell as some cotton, don't want to spend to much but something decent that will get me going with this.

Let me know your opinions, thanks.

 

[r4nd0m]

well I use 24/26 AWG titanium from Sweet Spot Vapers (http://www.sweetspotvapors.com) for the Crown RBA I use the 24 AWG with a 2.5mm diameter usually around 8/9 wraps and for wick I use the trusted Koh Gen Do organic cotton ... comes to 0.22ohm and I vape it on my Vaporshark DNA200 @210C and 65W - gives me enough vapour and flavour, currently enjoying the onehitwonder liquids so thats 80/20 VG/PG ...

with regards to wick I hold the cotton down where it hits the ring and cut straight across out the RBA cap back on and then feed it into the RBA itself making sure I got cotton set in front of the holes ...

just my way of building it - hope this helps