vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,749
Hey guys. Have you been tired of kinds of mod pod kits on the market? This time we'll be covering the Damn Vape Fresia Pod System Kit, it presents an original look of pod systems. You can get one from vapesourcing online store if you like it.
Damn Vape Fresia Pod System Kit features a sword-shaped body, thick in the middle and thin on both sides. Powered by a built-in 450mAh, it allows an output range from 6-8W with a long vaping time. To activate the pod system, all you do is simply inhale on the ergonomic mouthpiece. A full charge only takes about 35-40 mins via a micro USB port on the bottom of the device, and there is a three-color LED indicator light to show the battery level clearly, purple means the battery level is above 60%, blue means 30%-60%, and red means below 30%. In addition, Fresia Pod System comes with a range of safety features, including short circuit protection, timeout protection, low voltage protection, overcharge protection.
As for the pod, it can hold up to 2ml of your favorite e-juice. Refilling occurs via a filling port on the side, and it's easy to know the juice level as the pod is transparent. Inside the pod is a built-in 1.4ohm Ni80 coil, very suitable for e-liquids with high nicotine content but you have to replace the whole pod when it is past the best. Airflow is not adjustable, but that's nothing much for such a pod system. All in all, you might as well give this pod system a shot if you are in looking for a simple and cheap MTL device.
Where to buy: https://vapesourcing.com/damn-vape-fresia-kit.html
Parameters
Material: Aluminum+PCTG
Size: 108mm x 23.2mm x 11.7mm
Battery Capacity: 450mAh
Voltage: 0-0.5s: 3.4V; After 0.5s: 2.8V
Wattage: 6-8W
Charging Port: Micro-USB port
Pod Capacity: 2ml
Filling: Side Fill
Pod Coil: 1.4ohm, Ni80, 32ga, 6Wraps
Coil Resistance: 1.4ohm
Connector Type: Magnetic
Colors: Black, SS, Gunmetal, Green, Red, Rose Gold
You may also like: uwell caliburn near me
Damn Vape Fresia Pod System Kit features a sword-shaped body, thick in the middle and thin on both sides. Powered by a built-in 450mAh, it allows an output range from 6-8W with a long vaping time. To activate the pod system, all you do is simply inhale on the ergonomic mouthpiece. A full charge only takes about 35-40 mins via a micro USB port on the bottom of the device, and there is a three-color LED indicator light to show the battery level clearly, purple means the battery level is above 60%, blue means 30%-60%, and red means below 30%. In addition, Fresia Pod System comes with a range of safety features, including short circuit protection, timeout protection, low voltage protection, overcharge protection.
As for the pod, it can hold up to 2ml of your favorite e-juice. Refilling occurs via a filling port on the side, and it's easy to know the juice level as the pod is transparent. Inside the pod is a built-in 1.4ohm Ni80 coil, very suitable for e-liquids with high nicotine content but you have to replace the whole pod when it is past the best. Airflow is not adjustable, but that's nothing much for such a pod system. All in all, you might as well give this pod system a shot if you are in looking for a simple and cheap MTL device.
Where to buy: https://vapesourcing.com/damn-vape-fresia-kit.html
Parameters
Material: Aluminum+PCTG
Size: 108mm x 23.2mm x 11.7mm
Battery Capacity: 450mAh
Voltage: 0-0.5s: 3.4V; After 0.5s: 2.8V
Wattage: 6-8W
Charging Port: Micro-USB port
Pod Capacity: 2ml
Filling: Side Fill
Pod Coil: 1.4ohm, Ni80, 32ga, 6Wraps
Coil Resistance: 1.4ohm
Connector Type: Magnetic
Colors: Black, SS, Gunmetal, Green, Red, Rose Gold
You may also like: uwell caliburn near me
