vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
E-cigarette atomizer three ways of air intake, different ways different experience!
With the development of e-cigarette market, people are more and more picky about the use of e-cigarettes, and more and more people start to choose e-cigarette devices that are more suitable for them. The atomizer is believed to be familiar to e-cigarette users. The atomizer in e-cigarette is a part with a higher replacement rate. However, what most e-cigarette users fail to notice is that there are three different ways to get air into the atomizer, which have different experiences and advantages and disadvantages. The following is a detailed introduction of the advantages and disadvantages of the atomizer three ways of air intake.
The first is the top intake
Top air intake is a common way of air intake used by large number atomizer manufacturers. It has not easy oil leakage, easy to inject oil, strong operability and other advantages. However, its shortcomings are also more prominent, the taste is difficult to shape, if you want to achieve a better taste, you have to seek better heating components. It is a little difficult for the small white user to operate.
The side inlet
Side inlet atomizer is not widely used in the market. Its advantages are not easy oil leakage, strong reliability, simple oil injection. If you want a good and varied taste of smoke, you need to use the internal structure of the atomizer or use high-quality heating wire to fill. All in all, if you are a fickle e-cigarette user, it is recommended that you try a side intake atomizer for high playability.
And then finally the bottom intake
In the market, the bottom intake atomizer was the first to be produced, because at that time, the requirements for smoke taste and oil filling method were not so high. The biggest advantage of the bottom intake atomizer was simple taste shaping, low loss of heating components, and the best cost performance. However, with the new pursuit of taste and reliability, there are less and less atomizers in this way. Of course, another important reason why the bottom intake atomizer is out of favor is that it is easy to leak oil, and condensate is easy to leak from the inlet, so it is inconvenient to inject oil, and the inlet surface of the cabin is narrow. To put it simply, this kind of atomizer is suitable for the real DIY expert.
https://www.vapeciga.com/products/damn-vape-intense-mesh-mtl-rda-24mm
With the development of e-cigarette market, people are more and more picky about the use of e-cigarettes, and more and more people start to choose e-cigarette devices that are more suitable for them. The atomizer is believed to be familiar to e-cigarette users. The atomizer in e-cigarette is a part with a higher replacement rate. However, what most e-cigarette users fail to notice is that there are three different ways to get air into the atomizer, which have different experiences and advantages and disadvantages. The following is a detailed introduction of the advantages and disadvantages of the atomizer three ways of air intake.
The first is the top intake
Top air intake is a common way of air intake used by large number atomizer manufacturers. It has not easy oil leakage, easy to inject oil, strong operability and other advantages. However, its shortcomings are also more prominent, the taste is difficult to shape, if you want to achieve a better taste, you have to seek better heating components. It is a little difficult for the small white user to operate.
The side inlet
Side inlet atomizer is not widely used in the market. Its advantages are not easy oil leakage, strong reliability, simple oil injection. If you want a good and varied taste of smoke, you need to use the internal structure of the atomizer or use high-quality heating wire to fill. All in all, if you are a fickle e-cigarette user, it is recommended that you try a side intake atomizer for high playability.
And then finally the bottom intake
In the market, the bottom intake atomizer was the first to be produced, because at that time, the requirements for smoke taste and oil filling method were not so high. The biggest advantage of the bottom intake atomizer was simple taste shaping, low loss of heating components, and the best cost performance. However, with the new pursuit of taste and reliability, there are less and less atomizers in this way. Of course, another important reason why the bottom intake atomizer is out of favor is that it is easy to leak oil, and condensate is easy to leak from the inlet, so it is inconvenient to inject oil, and the inlet surface of the cabin is narrow. To put it simply, this kind of atomizer is suitable for the real DIY expert.
https://www.vapeciga.com/products/damn-vape-intense-mesh-mtl-rda-24mm
