What's new

DIY E liquid

WelshY

Member
Joined
Jul 21, 2013
Messages
8
Hi,

I looking For a cheap cheap way to smoke e cig and not crave for a real cigarette i have not smoke real cigarette for
3 weeks I been buying 100ml ready mix off misteliquid.co.uk for about £22.
http://www.misteliquid.co.uk/e-liquid/100ml-e-liquid/virginia-tobacco-e-liquid_2

I need help on getting started making my own if it will give more for the cost. I have came across
vape 54 50 pg 50vg 54mg 100ml for 19.99 P&P 1.99
http://www.vapeescape.co.uk/Mixology/Liquids--Flavourings/VAPE-54-PG/VG-100ml.html
can i just mix this with flavour and get it too 24mg with just this or Do it need more VG PG?

Is there a cheaper way?
 
Last edited:
You'll basically need a Nicotine base, like you have above.
Then you will need some flavours, and flavour dilution in % changes dramatically.
Then probably some PG and / or VG base (No Nic)
Soem syringes, bottles and an element of luck.
I'm kind of rushing this, as am shattered but feel free to ask away.

James
 
Yes, there's a certain man on here who sells nic base really, really cheap.
Have a look for Pirates-Vape on here :)
 
From nottingham? 15.99 for 72mg pg? so if i get 72mg VG i would dilute with non nic PG and flavour?
and pg in 72mg bottle will be %?

and how would I get PG VG 50/50 70/30 how would i work that out? is this needed if i don't know my e cig ohm voltage etc?
 
Last edited:
There's a mixing calculator at the top of the page :)
For me on 18mg, I do this for 10ml for 50/50 (ish)
2.5ml Base (PG)
1.5ml PG
5ml VG
Then 1ml flavouring :)
 
Cheapest vg is from boots the chemist in the cough mixture section. Labeled as glycerin :) DIY is by far the cheapest, you should be able to make 10ml for less than £1!
 
mixing is dead easy (still can't get my head around wattage/voltage/ohmage, though).

Most calculators don't calculate the PG/VG ratio for you, but if you buy your nic and flavours in PG base (which most are), you know that everything except the VG is PG.

If you're mixing 10ml up - use the calculator on here to determine how much base, nic & flavour you need. If it says 6ml needs to be base, you adjust the PG/VG ratio of this to your own needs.

In a nutshell, if you want your mix to be 70/30 PG/VG, then you want 30% to be VG, so you put 3ml VG in. The remainder of the base quantity will be PG (3ml in this case).

If you want a 50/50 mix, then 50% of the entire bottle will be VG, so you add 5ml, then the remainder of the base (1ml) will be PG.
If you're mixing up 30ml, then 15ml will be VG for a 50/50 base.

The calculator will provide all the other measurements you need.
 
Back
Top Bottom