Drag Problems

[Alfie Newstead]

Hi all,

I've recentlly developed a problem with my Drag mod, one of the wattage adjust buttons is sticking for some reason, so i was wondering if anyone can point me in the right direction as to how to fix this problem.

 

[joe clay]

Hi all,

I've recentlly developed a problem with my Drag mod, one of the wattage adjust buttons is sticking for some reason, so i was wondering if anyone can point me in the right direction as to how to fix this problem.

Hi there, it could be a number of things bud, 1, it could just be some old juice thats gone a bit tacky behind the button or 2, just some dirt or dust build up or 3, the switch button could need replacing

 

[crustyfolker]

As above. My guess is juice has made the button sticky 3 things you can try are keep pressing the button without the batteries in the mod see if it becomes less sticky, also try gripping the button and turning as it may free the button or last idea as i have used it with other mods take a few vapes and blow them directly at the button then give the button a few presses. The vapour should soften any dry liquid and free up the button again. It worked with my Hotcig r150 . The fire button and one of the up down buttons was sticking now they are all fine and have been for a few months now. But my Hotcig dx200 has a similar issue and the steaming trick works but needs repeating often. You could also try using some kind of alcohol wipe etc.

 

[Mitz]

Buy a can of compressed air. Same as you use to clear dust from computers and keyboards. They come with a long thin straw to direct the airflow. Blast some air around the problematic button.

 

[Ruskie]

Isopropanol and some vigorous pressing without the batteries in

 

[cheltenham cat]

nuke it from orbit.....its the only way

 

[moff000]

move to Gran Canaria and head to the Yumbo Centre.