Drip Box Voltage

[mcboffin]

Anyone know what the output voltage is? I've just ordered a dozen HE2s (rated 20A continuous but the "Mooch Max" is 25A) and I wanted to get a handle on current from the 0.2 ohm coils. I've got no idea about the innards of the mod so I'm going back to first principles and treating it as if it were a mech.

Ta in advance.

 

[hodge40]

3.7v bud

 

[disk0vape]

I found an awesome place for genuine for Sony VCT5, supposedly 30a - http://www.nkon.nl/

Take a few days to arrive but they are genuine - good price too

 

[mcboffin]

I found an awesome place for genuine for Sony VCT5, supposedly 30a - http://www.nkon.nl/

Take a few days to arrive but they are genuine - good price too

That's where I got the HE2s from - worked out about 3.75 a pop delivered (I've got a load of 18650s that need the annual replacement about now).

 

[mcboffin]

3.7v bud

I could have worked it out from what Kanger reckon

60W, 0.2 ohm = 3.5 V and 17.3A draw

3.7 V, 0.2 ohm = 68.45 W and 18.5 A draw

Good to go with HE2s (if I decide to buy one ... still having "bloke buying gadget dithering").

 

[hodge40]

At least you aint ginna lose much if you dont dig it mate

 

[mcboffin]

There is that. Sounds like my go to mech build of 0.3 ohms (2 x 7 wrap x 2.5 mm ID, 0.5 mm A1) would do the job.

 

[disk0vape]

There is that. Sounds like my go to mech build of 0.3 ohms (2 x 7 wrap x 2.5 mm ID, 0.5 mm A1) would do the job.

Really looking forward to the dripbox arriving so just checked my order on fasttech, I ordered on the 16th and dispatched yesterday - its gonna be some time yet

 

[mcboffin]

Picked one up from a local B&M for £30 today. Just need to wait for SWMBO to go to work to get it out of the car and have a Vape.

Undecided about what to put in it though .....

 

[mcboffin]

Really looking forward to the dripbox arriving so just checked my order on fasttech, I ordered on the 16th and dispatched yesterday - its gonna be some time yet

First impressions are good. It's very dinky and the dripper is surprisingly ok (although I found the pre installed 0.2 ohm coils a bit too rowdy with the juice I was using - B-Juice Beetlejuice - so I put another build in at about 0.3 and it's vaping like a champ).

On another note, the pre made coils are set too low in the RDA IMHO so if you're going to rebuild it, it's worth raising the coils to roughly the height of the post screws so it catches the airflow better.