Dual coil the igo-l?

[RicModMaker]

I should probably just do it but has anyone put 2 coils on an igo-l?

 

[cliffo]

I'm running 2 igo's on dual micros and cotton ,

1.5 ohm , lovely.

do it !

 

[RicModMaker]

2x3ohm coils? What's that, about 10 wraps on .2 kanthal?

 

[cliffo]

Think it's 8 wraps .25 , tell the truth i can't remember they have been going strong for about a month now , regular cotton change and a quick dry burn ,

Only one air hole drilled to 1.5 mm

 

[RicModMaker]

I did 2 coils @ 10 wraps on .20 and it came out at 1.8ohms.
I'm not sure if it's a better vape than a single coil though. It seems slightly harsher on the TH.
Will a dual coil set-up use more battery power with 2 coils to heat up?
Here it is:

 

[Midnight]

Wow, that's impressive!
How do you get the cotton through all those wraps? I can never change mine on my baby octopus. It is wedged in too tight and swelled with the juice so I have to make a new coil each time.

 

[RicModMaker]

Wow, that's impressive!
How do you get the cotton through all those wraps? I can never change mine on my baby octopus. It is wedged in too tight and swelled with the juice so I have to make a new coil each time.

Thanks Midnight. I straighten the coil with a nail and then lick and twist the end of the cotton. Hold the coil and gentle pull it through.

 

[T wisted]

Wow, that's impressive!
How do you get the cotton through all those wraps? I can never change mine on my baby octopus. It is wedged in too tight and swelled with the juice so I have to make a new coil each time.

If you pinch the cotton wool at both ends and gently tease it out you can save your coil. I put my drill bit in after to make sure its all lined up. Take drill out give it a burn then add new c/wool x

 

[RicModMaker]

I think I also need to ditch the metal drip tip. That sucker is getting hot!

 

[Midnight]

I only do 4/5 wraps so it should be easier for me. I do twist the cotton ends but once the juice is on and it's been vaped it swells too much to be able to get it back out. I've tried cutting the cotton ends off to try and make it easier to pull out but I end up yanking the coils out of position and just end up getting mardy over it and redoing it all. And I only use a single coil with .2 kanthal. Yours makes mine look like a Blue Peter effort.