How To ego t atomiser

[daleson]

Hi guys/girls ......I just been messing with an ego/tornado t cone shaped atomiser as the coil went in it ..so i thought i would have ago at recoiling 1 so i stripped the old coil out were i found each side was soldered to the 510/ego connecter through some tiny holes so i broke them of made my tiny coil wrapped it round needle four times and just put a insolated piece of wire casing off a piece of old wire ,over 1 side of the coil and just put both ends through the hole at bottom were the ceramic pot and mesh is and just like the viva nova and the kanger t3 theres the little rubber bung and the center pin were the life goes ...and bobs your uncle my ego t atty is back up and running