sickboy
Postman
- Joined
- Aug 11, 2015
- Messages
- 88
I thought I would review this as the only review I could find was on YouTube in german. This is also my first temp control device so I can't compare it to other TC devices.
The T1s is quite small measuring 95x52.3x25mm, a little bigger than an iStick 50w. The case is stainless steel and the sides have a nice textured finish that I like. It feels compact, well made, the buttons don't rattle and the OLED screen is easy to read.
The device and packaging are of a high standard so I was surprised the instructions were not very clear and had some mistakes. Getting from Fahrenheit to Celsius was not covered and after lots of trial and error I figured it out. Also not covered were which coils would work in Temp mode, no mention whatsoever! I think it is set for Ni200 I could burn cotton at 195C indicated with a Ti coil (couldn't think of another way to gauge the temp).
Features:
100W Output
Built-in 4000mah polymer battery
0.1-1.0ohm Temp mode
0.16-2.0ohm VW mode
Adjustable wattage 1W to 100W
Adjustable temp 100-315C/200-600F
Available colours Black, Red, Blue and Silver
Micro USB port
Pros:
Looks good and feels good
Easy to adjust settings
Used less than half a charge vaping in temp mode for most of the day
Costs about £50
Cons:
Instructions
Lack of info
Can't lock just the +- buttons (well I can't)
Asks if it's the same or swapped coil and if same it doesn't remember the temp I was on
Had to order from Germany
Would I recommend it? Yes I think it is quality.
I was using a Smok TFV4 RBA with a 26awg Titanium Grade 1 0.32ohm coil. Best temp for me was 190C
The T1s is quite small measuring 95x52.3x25mm, a little bigger than an iStick 50w. The case is stainless steel and the sides have a nice textured finish that I like. It feels compact, well made, the buttons don't rattle and the OLED screen is easy to read.
The device and packaging are of a high standard so I was surprised the instructions were not very clear and had some mistakes. Getting from Fahrenheit to Celsius was not covered and after lots of trial and error I figured it out. Also not covered were which coils would work in Temp mode, no mention whatsoever! I think it is set for Ni200 I could burn cotton at 195C indicated with a Ti coil (couldn't think of another way to gauge the temp).
Features:
100W Output
Built-in 4000mah polymer battery
0.1-1.0ohm Temp mode
0.16-2.0ohm VW mode
Adjustable wattage 1W to 100W
Adjustable temp 100-315C/200-600F
Available colours Black, Red, Blue and Silver
Micro USB port
Pros:
Looks good and feels good
Easy to adjust settings
Used less than half a charge vaping in temp mode for most of the day
Costs about £50
Cons:
Instructions
Lack of info
Can't lock just the +- buttons (well I can't)
Asks if it's the same or swapped coil and if same it doesn't remember the temp I was on
Had to order from Germany
Would I recommend it? Yes I think it is quality.
I was using a Smok TFV4 RBA with a 26awg Titanium Grade 1 0.32ohm coil. Best temp for me was 190C
Attachments
Last edited: