adjam1972
Mod Maker
- Joined
- May 30, 2013
- Messages
- 1,892
Flamed Nemesis Clone 1
This is a Vaporbreak Nemesis clone, so only has the Angel of Death etching on the front of the main tube, it does not have the Nemesis name or serial number on the back of the tube and has the vaporbreak logo on the switch not the train logo.Switch upgraded to magnets.
The tubes have first been polished up to 12000 grit using Micromesh, then they have been hand flamed with a blowtorch to give a beautiful gold thorugh to blue heat treatment.
This was my first flamed mod and as such had a slight problem in that when flaming the mod the bottom edge of the main tube flared out slightly due to the heat and how I was holding the mod. It has been sanded down and the switch now fits fine but I would rather mention it at the outset.
UK rrp £20-£30 I paid £18 inc delivery.
Selling for £35 inc Paypal and RM Second Class Recorded delivery.
Flamed Nemesis Clone 2
I’m pretty sure this is an FT Nemesis clone, not 100% sure as it was purchased from the forum. It has the Angel of Death etching on the front and the Nemesis name and serial number on the back.Magnet upragde in switch.
This mod was badly scored on one section so took quite a bit of work getting it back to a good finish then it has been polished up to 12000 grit using Micromesh, then they have been hand flamed with a blowtorch to give a consistant blue/purple heat treatment.
UK rrp £20-£30 I paid £10 inc delivery.
Sold inc Paypal and RM Second Class Recorded delivery.
Flamed 69 Clone
FT 69 clone centre section has been polished and flame treated to give a nice gold throgh to purple heat treatment which can be seen fully when in 18650 mode.
UK rrp £25-£30 i paid £15 inc delivery.
Selling for £30 inc Paypal and RM second class Recorder delivery
This is a Vaporbreak Nemesis clone, so only has the Angel of Death etching on the front of the main tube, it does not have the Nemesis name or serial number on the back of the tube and has the vaporbreak logo on the switch not the train logo.Switch upgraded to magnets.
The tubes have first been polished up to 12000 grit using Micromesh, then they have been hand flamed with a blowtorch to give a beautiful gold thorugh to blue heat treatment.
This was my first flamed mod and as such had a slight problem in that when flaming the mod the bottom edge of the main tube flared out slightly due to the heat and how I was holding the mod. It has been sanded down and the switch now fits fine but I would rather mention it at the outset.
UK rrp £20-£30 I paid £18 inc delivery.
Selling for £35 inc Paypal and RM Second Class Recorded delivery.
Flamed Nemesis Clone 2
I’m pretty sure this is an FT Nemesis clone, not 100% sure as it was purchased from the forum. It has the Angel of Death etching on the front and the Nemesis name and serial number on the back.Magnet upragde in switch.
This mod was badly scored on one section so took quite a bit of work getting it back to a good finish then it has been polished up to 12000 grit using Micromesh, then they have been hand flamed with a blowtorch to give a consistant blue/purple heat treatment.
UK rrp £20-£30 I paid £10 inc delivery.
Sold inc Paypal and RM Second Class Recorded delivery.
Flamed 69 Clone
FT 69 clone centre section has been polished and flame treated to give a nice gold throgh to purple heat treatment which can be seen fully when in 18650 mode.
UK rrp £25-£30 i paid £15 inc delivery.
Selling for £30 inc Paypal and RM second class Recorder delivery
Last edited:
