GEEK VAPE GBOX S100 MOD

[WaitFor1t88]

In stock at https://www.ecigone.co.uk/mod-shop/geek-vape-gbox-s100-mod

Geek Vape GBOX S100 Mod
The Geek Vape GBOX S100 TC Squonker Box Mod is a stunning output technology catering to building enthusiasts, integrating a squonk-ready system with a highly effective GBOXS100 chipset, featuring power output up to 100W, full temperature control with TCR adjustments, and a structural design with enlarged OLED display, ventilation holes, and effective placement of operational buttons....


Features:
Dimensions: 46mm by 56mm by 88mm
Integrated GBOXS100 Chipset
Squonk-Ready System
Dual High Amperage 18650 Battery - Sold Separately
Wattage Output Range: 1-100W
Minimum Atomizer Resistance: 0.05ohm
Temperature Control Range: 200-600F
Supports Ni200, Titanium, and Stainless Steel Heating Elements
Temperature Coefficient of Resistance (TCR) Adjustments
Premium Ruberized Paint Finish
Intuitive OLED Screen
Center Aligned Control Face
Two Circle Adjustment Buttons
Oversized Firing Mechanism
Battery Lock Switch Mechanism
Ventilation Holes
MicroUSB Port - Passthrough Capability
ON/OFF Button on Base of Device
Smart Charging Management
Spring-Loaded 510 Connection.

 

[eyeball kid]

In stock at https://www.ecigone.co.uk/mod-shop/geek-vape-gbox-s100-mod

Geek Vape GBOX S100 Mod
The Geek Vape GBOX S100 TC Squonker Box Mod is a stunning output technology catering to building enthusiasts, integrating a squonk-ready system with a highly effective GBOXS100 chipset, featuring power output up to 100W, full temperature control with TCR adjustments, and a structural design with enlarged OLED display, ventilation holes, and effective placement of operational buttons....


Features:
Dimensions: 46mm by 56mm by 88mm
Integrated GBOXS100 Chipset
Squonk-Ready System
Dual High Amperage 18650 Battery - Sold Separately
Wattage Output Range: 1-100W
Minimum Atomizer Resistance: 0.05ohm
Temperature Control Range: 200-600F
Supports Ni200, Titanium, and Stainless Steel Heating Elements
Temperature Coefficient of Resistance (TCR) Adjustments
Premium Ruberized Paint Finish
Intuitive OLED Screen
Center Aligned Control Face
Two Circle Adjustment Buttons
Oversized Firing Mechanism
Battery Lock Switch Mechanism
Ventilation Holes
MicroUSB Port - Passthrough Capability
ON/OFF Button on Base of Device
Smart Charging Management
Spring-Loaded 510 Connection.

Missed out on the pre sale of these from gearbest last year. The only odd thing is 100w for a dual cell mod. Don't get me wrong it's a sensible wattage but even my old i stick tc beater does 120w. I've found with a few of the airier rda' s And modern large coils I'm often creeping over 100w. I'm the last person to push the limits. I mainly vape around ten watts but to get a nice vape from a tsunami 24 with some flaptons I'm reaching 110w without thinking about it. Maybe it will be upgraded.

 

[WaitFor1t88]

Missed out on the pre sale of these from gearbest last year. The only odd thing is 100w for a dual cell mod. Don't get me wrong it's a sensible wattage but even my old i stick tc beater does 120w. I've found with a few of the airier rda' s And modern large coils I'm often creeping over 100w. I'm the last person to push the limits. I mainly vape around ten watts but to get a nice vape from a tsunami 24 with some flaptons I'm reaching 110w without thinking about it. Maybe it will be upgraded.

I thought that was a bit weird , and not the norm with 2 batterie mods, I think theres a 100w istick isn't there? but the batteries are in parallel, could be the case? strange move imo

 

[eyeball kid]

I thought that was a bit weird , and not the norm with 2 batterie mods, I think theres a 100w istick isn't there? but the batteries are in parallel, could be the case? strange move imo

The old istick 100 the istick 100tc upgrades to 120w but it's a good year old now if not more.

 

[WaitFor1t88]

The old istick 100 the istick 100tc upgrades to 120w but it's a good year old now if not more.

Definitely outdated
I dont see many people bothering with this geekvape offering, not when that lost vape drones about

 

[eyeball kid]

Definitely outdated
I dont see many people bothering with this geekvape offering, not when that lost vape drones about

I am awaiting the arrival of my mvapes DNA one. Until then the dripbox 160 covers my high wattage needs.
Intrested to see if anyone converts one of the four cell mods down to a 250w squonker. Only a matter of time. That will be a brick.

 

[WaitFor1t88]

I am awaiting the arrival of my mvapes DNA one. Until then the dripbox 160 covers my high wattage needs.
Intrested to see if anyone converts one of the four cell mods down to a 250w squonker. Only a matter of time. That will be a brick.

that'll be a nice little number,
your probably right, only a matter of time, holding a least a 30ml bottle lol, and as you say be massive

 

[mannikon]

Well, I got one today.
Prefer how it feels in the hand over the Wraith.

Bought a Steam Crave Squonk Mod a couple of weeks back in a sale at SR Vapes.
Sadly, it died.
Complete board failure (explains why they were discontinued).

Steve at SR Vapes being the concerned excellent vendor that he is, emailed me a return postage cover, then rang me to ask would I like the Geek Vape as he was getting them in so I said yes please.
And just like that I now have one of these.

So far so good, lovely finish, like the bottle and the way it fits (similar to the Pico). Great screen, good firm clicky buttons and of course two batteries so should last a good long time.
100W is enough for me but who knows they may put out a firmware update. If they do I hope they add a lock buttons option, only thing I'm missing is that though I've not accidentally altered watts whichever way I hold it, up/down buttons need a firm press. I prefer black mods so fits in with my collection. Look forward to testing it at higher wattage maybe with a Tsunami ...

 

[eyeball kid]

What size rda does he take without overhang.

 

[mannikon]

What size rda does he take without overhang.

25mm without any overhang, would take 27mm if there was such a size atty ... 30mmm would overhang a wee bit