Gina3fvape
Veteran
- Joined
- May 22, 2015
- Messages
- 9,858
Hi, guys! Welcome to New Product Introduction ! I have a question: do you need a RDA at present? Today let me introduce you one RDA named Original Wotofo STNG MTL RDA . Now let’s take a closer look at the RDA below.
The Wotofo STNG MTL RDA is constructed from stainless steel material in 22mm diameter.The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite airflow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on. The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes. On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization. The narrow looking drip tiappears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung (MTL) inhales. It's made to let you enjoy your thick and rich draws of nicotine hitsmouth to lung.
Main Feautures:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design
Want to win's the Original Wotofo STNG MTL RDA for free?
Enter the Original Wotofo STNG MTL RDA Giveaway now >>> 1 winners will be chosen randomly.
If you can not wait for have this item, you can also order the Original Wotofo STNG MTL RDA directly on 3FVAPE.
Thank you for support 3FVAPE, wish you good luck !
The Wotofo STNG MTL RDA is constructed from stainless steel material in 22mm diameter.The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite airflow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on. The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes. On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization. The narrow looking drip tiappears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung (MTL) inhales. It's made to let you enjoy your thick and rich draws of nicotine hitsmouth to lung.
Main Feautures:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design
Want to win's the Original Wotofo STNG MTL RDA for free?
Enter the Original Wotofo STNG MTL RDA Giveaway now >>> 1 winners will be chosen randomly.
If you can not wait for have this item, you can also order the Original Wotofo STNG MTL RDA directly on 3FVAPE.
Thank you for support 3FVAPE, wish you good luck !
