So you've just got your brand spanking new goblin mini RTA and you have a super nice 510 drip tip you want to but on there but realise the 510 adapter is rubbish as i keeps sliding out and also don't get me started on the plastic tube that UD expect us to use as a drip tip.
I watched grimmgreen's video on the RTA and he mentioned a drip tip which you can purchase for the goblin to make it perfect BUT the cost of these drip tips ranged from £10 and up and that's quite a lot to spend on a drip tip in my eyes to be honest. The drip tip I use is the trinity drip tip but its a chinese clone which i'm happy with and cost only a few pounds.
Okay so i've linked some pictures down below but to keep it simple here's the method.
You'll need a CHEAP acrylic/plastic drip tip that can easily be cut through there's many on the market you might want to purchase a few as they are really cheap and you'll see why in a moment. Also get an acrylic drip tip where the mouth piece is the size of a 510 hole.
This is what i've used https://www.fasttech.com/products/0...ic-pom-detachable-hybrid-510-drip-tip-10-pack
A knife or something with this you must be able to cut through the drip tip.
A Goblin Mini RTA
Method:
1) Completely take apart the Goblin Mini RTA including the top bit where the chimney screws onto the top bit i have no idea what it's called
2) Take your acrylic drip tip and cut a small piece of the top about 1-1.5mm in thickness. I heated up my knife so i can cut through the drip tip like butter. You might want some sanding paper to sand of the melted plastic of the side. you can use any means you can to cut it but i just recommend using a hot knife because of the small size you are cutting
3) Place the drip tip in between the top piece and the chimney section and screw it down. Screwing it down should hold the piece down and also align it so that it is in the middle. make sure its tight when you screw it down because now the O-ring at the top isn't in place and can cause flavour to leak from the top if it isn't screw down properly
4)Put the tank together and place your favourite 510 drip tip on the top.
I recommend you get a few acrylic drip tips as you can make mistakes and also the little piece could crack as you constantly add and remove drip tips. But this is a very simple and cheap way to add your favourite drip tip to your RTA. If you have any questions post them below.
I haven't seen this fix any where on the internet and thought of this idea whilst in the shower
.If someone could make a youtube video of this to visually help others that would be awesome and also send this to your friends and family who use the goblin. If you do make a video on this i would love it if you could credit me by my name Yussi01 or Yusuf Thanks.
PS Please excuse the grammar in the post as it's late but i really wanted to get this out to you guys before i go to sleep
I watched grimmgreen's video on the RTA and he mentioned a drip tip which you can purchase for the goblin to make it perfect BUT the cost of these drip tips ranged from £10 and up and that's quite a lot to spend on a drip tip in my eyes to be honest. The drip tip I use is the trinity drip tip but its a chinese clone which i'm happy with and cost only a few pounds.
Okay so i've linked some pictures down below but to keep it simple here's the method.
You'll need a CHEAP acrylic/plastic drip tip that can easily be cut through there's many on the market you might want to purchase a few as they are really cheap and you'll see why in a moment. Also get an acrylic drip tip where the mouth piece is the size of a 510 hole.
This is what i've used https://www.fasttech.com/products/0...ic-pom-detachable-hybrid-510-drip-tip-10-pack
A knife or something with this you must be able to cut through the drip tip.
A Goblin Mini RTA
Method:
1) Completely take apart the Goblin Mini RTA including the top bit where the chimney screws onto the top bit i have no idea what it's called
2) Take your acrylic drip tip and cut a small piece of the top about 1-1.5mm in thickness. I heated up my knife so i can cut through the drip tip like butter. You might want some sanding paper to sand of the melted plastic of the side. you can use any means you can to cut it but i just recommend using a hot knife because of the small size you are cutting
3) Place the drip tip in between the top piece and the chimney section and screw it down. Screwing it down should hold the piece down and also align it so that it is in the middle. make sure its tight when you screw it down because now the O-ring at the top isn't in place and can cause flavour to leak from the top if it isn't screw down properly
4)Put the tank together and place your favourite 510 drip tip on the top.
I recommend you get a few acrylic drip tips as you can make mistakes and also the little piece could crack as you constantly add and remove drip tips. But this is a very simple and cheap way to add your favourite drip tip to your RTA. If you have any questions post them below.
I haven't seen this fix any where on the internet and thought of this idea whilst in the shower
.If someone could make a youtube video of this to visually help others that would be awesome and also send this to your friends and family who use the goblin. If you do make a video on this i would love it if you could credit me by my name Yussi01 or Yusuf Thanks.PS Please excuse the grammar in the post as it's late but i really wanted to get this out to you guys before i go to sleep
