escape2vapour
Postman
- Joined
- Jun 8, 2015
- Messages
- 120
HCIGAR VT 200 EVOLV DNA200 BOX MOD - £99.99
THE HCIGAR VT200 IS THE NEXT EVOLUTION IN REGULATED BOX MODS!
The HCigar VT200 is the updated version of the original VT40 device. The HCigar VT200 features a genuine Evolv DNA 200 chip set which allows you to vape up to 200 watts! You won’t ever need another device due to the incredible power and design of the HCigar VT200.
The HCigar VT200 can fire standard atomizers as low as 0.1 ohm. The Evolv DNA200 chip set also provides a large screen board for easy visibility.
The HCigar VT200 also features Temperature Control which allows you fire Nickel Wire Ni200 for a perfect vape setting adjusted to your own personal preferences with a fully integrated software suite that allows the user to connect the device to a computer for full customization of all features and display screen for the unit!
The HCigar VT200 has a power regulated digital switch-mode DC-DC converter for personal vaporizers.
It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Step Up/Step Down Topology, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. It is the most advanced personal vaporizer controller ever made.
Powered by an 11.1V 1300mAh 30C lithium-polymer pack, this battery outputs an equivalent of approximately 4200mAh compared to what we’re used to with 18650 batteries! This battery pack is included with the device, is replaceable, and may be available for additional purchase at a later date.
The newest Evolv DNA200 board on this device has many of the well known features of the previous DNA40 board, such as the following features:-
The Main Functions & Operations
1.Activated Mode&Attaching a new atomizer:To wake the device from power off state, tap the Fire button. The VT200 uses the resistance of the atomizer to calculate the temperature of the heating coil. It continually looks to see whether a new or changed atomizer has been connected.
If you are using temperature protection, be careful to only attach new atomizers that have cooled to room temperature to the device. If a new atomizer is attached to the VT200 before it has cooled down, the temperature may read and protect incorrectly until the new atomizer cools.
When you connect a new atomizer or disconnect and reconnect your existing atomizer, the VT200 will prompt you to confirm this change. When you fire the first time, before activating the VT200 will prompt “New Coil? UP YES/DOWN NO
THE HCIGAR VT200 IS THE NEXT EVOLUTION IN REGULATED BOX MODS!
The HCigar VT200 is the updated version of the original VT40 device. The HCigar VT200 features a genuine Evolv DNA 200 chip set which allows you to vape up to 200 watts! You won’t ever need another device due to the incredible power and design of the HCigar VT200.
The HCigar VT200 can fire standard atomizers as low as 0.1 ohm. The Evolv DNA200 chip set also provides a large screen board for easy visibility.
The HCigar VT200 also features Temperature Control which allows you fire Nickel Wire Ni200 for a perfect vape setting adjusted to your own personal preferences with a fully integrated software suite that allows the user to connect the device to a computer for full customization of all features and display screen for the unit!
The HCigar VT200 has a power regulated digital switch-mode DC-DC converter for personal vaporizers.
It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Step Up/Step Down Topology, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation. It is the most advanced personal vaporizer controller ever made.
Powered by an 11.1V 1300mAh 30C lithium-polymer pack, this battery outputs an equivalent of approximately 4200mAh compared to what we’re used to with 18650 batteries! This battery pack is included with the device, is replaceable, and may be available for additional purchase at a later date.
The newest Evolv DNA200 board on this device has many of the well known features of the previous DNA40 board, such as the following features:-
- Large OLED screen displays the set wattage level, atomizer resistance, battery level indicator, firing voltage, and more. All of this information is completely user customizable in this new DNA200 board!
- “Atty Lock” function to disable refinement – optional, and user customizable through software.
- Built-in balancing charge board, to ensure all cells in the lithium battery pack always maintain an equal charge state, preventing a dangerous thermal runaway.
- Power regulation, to maintain a consistent power output, regardless of the charge status of your battery.
- Voltage step down technology via a buck chip allows the device to pull voltage below the natural charge state of the battery. What this means, is the ability to put a very low resistance atomizer on the device, while still be able to fire at very low wattage. This is a great feature when you want to take a break from huge wattage cloud chucking and relax with some low wattage puffing from your low resistance setup!
- Variable wattage control, up to 200 Watts! TRUE 200W of DC power output! No “rattlesnake” effect that you would get with PWM (Pulse Width Modulation) devices, the DNA200 offers true and clean 200 Watts of power output! When used with temperature protection turned on, the wattage control acts as your accelerator, which dictates how fast your coil will get up to temperature.
- Temperature control / protection technology, which has a way to calculate the approximate temperature of your coil. By setting a maximum temperature limit cut off point, the chip knows to pull back on the power (wattage/voltage) output so that the temperature does not exceed your set cut off.
- Spring loaded floating 510 brass center pin for maximum electrical conductivity and consistent accurate connection.
- Wattage and menu adjustments performed via up and down buttons.
- Built in micro USB charger allows pass-thru charging/vaping. Port indicator light identifies the charge status of the battery. Red when charging, green when complete.
- Available in black and coming soon in Silver and Blue
- Dimensions:3-1/2″ x 2-1/8″ x 1″
- Spring Loaded 510 Contact Pin
- Uses the DNA 200 Chip by Evolv
- Preheat Feature for Temp control users
- Large OLED Display
- Operating Wattage: 1.0 to 200.0 W
- Resistance Range (Standard Coil): 0.1 Ohms to 2.0 Ohms
- Resistance Range (Temperature Control Coil): 0.08 Ohms to 1.0 Ohms
- Operating Temperature Control: 200F to 600F
- 1300mAh 3S Lithium Polymer Battery
- Replacement battery packs will be available in the near future
- Low voltage protection
- Low resistance protection
- Short circuit protection
- High Temperature protection
- Can be charged via USB (Micro USB Cable included)
- Passthru functionality
- 1 x HCigar VT200 Mod
- 1 x Micro USB charging cable
- 1 x User manual
The Main Functions & Operations
1.Activated Mode&Attaching a new atomizer:To wake the device from power off state, tap the Fire button. The VT200 uses the resistance of the atomizer to calculate the temperature of the heating coil. It continually looks to see whether a new or changed atomizer has been connected.
If you are using temperature protection, be careful to only attach new atomizers that have cooled to room temperature to the device. If a new atomizer is attached to the VT200 before it has cooled down, the temperature may read and protect incorrectly until the new atomizer cools.
When you connect a new atomizer or disconnect and reconnect your existing atomizer, the VT200 will prompt you to confirm this change. When you fire the first time, before activating the VT200 will prompt “New Coil? UP YES/DOWN NO
