Apologies if this post annoys anyone that feels I should just search to find the answer myself, but I've done hours of reading forum posts about vaping equipment both before and after I bought some kit and hope people might be willing to help by recommending stuff based on what I've tried already.
I started off with the Evod starter kit from pink mule. It seemed okay but I never really felt satisfied, not so much through lack of nicotine, just the airiness and lack of vapour made it feel like I wasn't getting enough of a hit.
I'm lucky enough to have a vaping shop down the road from where I work, and I tried some e-juice flavours using their equipment which I believe are Stardust V2's, Kanger T2's both branded as their own and aClear DC's which appear to be the same thing as iClear 16's and the whole experience was much more satisfying than using my Evods.
I bought one of the aClear DC's so that I'd always have access to replaceable heads in a pinch and the vape is so much better, not so airy, a reassuring bit of resistance and much more vapour and flavour but there are two caveats. It uses a ridiculous amount of juice, it must use at least three times as much as the Evod, but I suppose that's a sacrifice I'm willing to make for the better experience. Also, the juice collects around the tip causing it to get sucked into my mouth regularly unless I undue the tip and let it drain back down everytime I take it out of my pocket, I think I'm taking on way too much nicotine because of this (using 18mg liquid) as I'm getting spasms in my eyelids, this is compounded by the fact I'm prescribed stimulants. The other thing I don't like as I've just received some wick and wire to rebuild my heads is that I can't remove the head without draining the juice.
So, what would you lovely people recommend I try next? If there was a bottom coil that had the characteristics of the iClear/aClear that'd be great. Or maybe another dual coil that doesn't have the problem with juice collecting around the tip? Rebuildable is a must.
Or maybe a VG heavy juice for the Evod, would that make a lot of difference?
Just to be thorough, to complete my setup I have a couple of the basic own branded 1300mah batteries from Pink Mule. I can't find anywhere what voltage these are and can't find my multimeter anyway (so have to hold of rebuilding my heads too, ugh).
I started off with the Evod starter kit from pink mule. It seemed okay but I never really felt satisfied, not so much through lack of nicotine, just the airiness and lack of vapour made it feel like I wasn't getting enough of a hit.
I'm lucky enough to have a vaping shop down the road from where I work, and I tried some e-juice flavours using their equipment which I believe are Stardust V2's, Kanger T2's both branded as their own and aClear DC's which appear to be the same thing as iClear 16's and the whole experience was much more satisfying than using my Evods.
I bought one of the aClear DC's so that I'd always have access to replaceable heads in a pinch and the vape is so much better, not so airy, a reassuring bit of resistance and much more vapour and flavour but there are two caveats. It uses a ridiculous amount of juice, it must use at least three times as much as the Evod, but I suppose that's a sacrifice I'm willing to make for the better experience. Also, the juice collects around the tip causing it to get sucked into my mouth regularly unless I undue the tip and let it drain back down everytime I take it out of my pocket, I think I'm taking on way too much nicotine because of this (using 18mg liquid) as I'm getting spasms in my eyelids, this is compounded by the fact I'm prescribed stimulants. The other thing I don't like as I've just received some wick and wire to rebuild my heads is that I can't remove the head without draining the juice.
So, what would you lovely people recommend I try next? If there was a bottom coil that had the characteristics of the iClear/aClear that'd be great. Or maybe another dual coil that doesn't have the problem with juice collecting around the tip? Rebuildable is a must.
Or maybe a VG heavy juice for the Evod, would that make a lot of difference?
Just to be thorough, to complete my setup I have a couple of the basic own branded 1300mah batteries from Pink Mule. I can't find anywhere what voltage these are and can't find my multimeter anyway (so have to hold of rebuilding my heads too, ugh).
