vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
The RDA's huge atomizing space and extremely strong coil compatibility are among the top levels among all atomizer products. The RDA in the hands of large smokers is definitely the most favored equipment. For novice users, the RDA may have difficulty in making the atomizing core. But what really bothers the novice user is how to make a high level of atomizing core, completely releasing the performance of the RDA.
According to the structure of the atomizer, select the size and type of the coil.
In general, the factors that have the greatest impact on the atomizer's coil compatibility are atomizer space, electrode column openings, and intake air volume. The current large smoke RDAs are well compatible with a variety of fancy coils, while the early 22mm diameter RDAs are only compatible with some fancy coils. Depending on the amount of intake air, it is recommended to use a fancy coil or a minimum of 24G heating wire if the atomizer can be used without resistance.
Try to choose high performance coil.
At present, the most commonly used coil material on the market is NI80 or NI90. It is true that the coils of the two materials are stronger than the A1 heating wire, which is more suitable for use on the large smoke RDA. However, when choosing some fancy coils or racing-grade heating wires, you must fully consider the heat dissipation capability of the atomizer, and also consider whether the equipment in your hand can push the coil with low resistance.
Control the length of the foot needle to ensure the integrity of the foot needle
For the two-in-one coil, the length of the two pins is equal, and the two coils can receive the output of the same speed, so that the two coils can obtain the same heating speed. The fancy coil needs to pay more attention to the fact that when cutting the foot pin, care must be taken not to damage its integrity. The defect of a small heating wire is likely to have a very large effect on the heat conduction of the entire coil.
The wire is adjusted to heat evenly
Regardless of the atomizer, the process of burning is essential. The process of the wire adjustment can cause oxidation of the surface of the coil, and the biggest effect is to ensure that the coil can be uniformly heated. In particular, the two-coil coil, the two coils can simultaneously heat evenly to achieve the true performance of the dual-coil. For novice users, as long as you have more patience, you can master the skills.
The amount of cotton is not good.
Many novice users mistakenly believe that more cotton can store more e-liquid and increase the number of suction ports after each drop. In fact, if the amount of cotton is too tight, it will reduce its oil-conducting capacity and the absorption capacity of e-liquid. At the same time, it will also have the disadvantage of blocking the intake air from occupying the atomization space. The right amount and fluffy cotton can have excellent ability to absorb and conduct e-liquid.
RDA can adjust e-liquid?
Can not blend, RDA is the atomizer of the lungs connected to the lungs, the blending is to use tobacco oil and pure VG (glycerin) to stop blending, glycerin is no taste, the role is to increase the amount of smoke, if you Just for smoking, you don't have to adjust. If you want to play more hot silk and play with big smoke, you can stop blending according to your taste. There is no e-liquid adjustment method. The more the glycerin is, the less the original flavor of the e-liquid will be.
Why is the RDA hot?
Ordinary RDAs are much shorter than oil atomizers and finished products. Moreover, the calorific value is large. In the process of continuing smoking, the hot wire has not completely cooled up, and the ignition is stopped again. The accumulation of heat is completely normal. However, players with multiple devices should carefully reflect whether there is a short-circuit between the hot-wired joints before closing the position. This kind of scene will also have a high-heat scene, and it is easy to blow the wire, there is still a certain risk. If it is really hot, because the output power of the machine rod cannot be changed, reduce the number of hot wires, perhaps reduce the resistance, and add more cotton to the cotton core to add cooling speed. High-power electronic pole players, trying to reduce the input power, can be handled normally.
According to the structure of the atomizer, select the size and type of the coil.
In general, the factors that have the greatest impact on the atomizer's coil compatibility are atomizer space, electrode column openings, and intake air volume. The current large smoke RDAs are well compatible with a variety of fancy coils, while the early 22mm diameter RDAs are only compatible with some fancy coils. Depending on the amount of intake air, it is recommended to use a fancy coil or a minimum of 24G heating wire if the atomizer can be used without resistance.
Try to choose high performance coil.
At present, the most commonly used coil material on the market is NI80 or NI90. It is true that the coils of the two materials are stronger than the A1 heating wire, which is more suitable for use on the large smoke RDA. However, when choosing some fancy coils or racing-grade heating wires, you must fully consider the heat dissipation capability of the atomizer, and also consider whether the equipment in your hand can push the coil with low resistance.
Control the length of the foot needle to ensure the integrity of the foot needle
For the two-in-one coil, the length of the two pins is equal, and the two coils can receive the output of the same speed, so that the two coils can obtain the same heating speed. The fancy coil needs to pay more attention to the fact that when cutting the foot pin, care must be taken not to damage its integrity. The defect of a small heating wire is likely to have a very large effect on the heat conduction of the entire coil.
The wire is adjusted to heat evenly
Regardless of the atomizer, the process of burning is essential. The process of the wire adjustment can cause oxidation of the surface of the coil, and the biggest effect is to ensure that the coil can be uniformly heated. In particular, the two-coil coil, the two coils can simultaneously heat evenly to achieve the true performance of the dual-coil. For novice users, as long as you have more patience, you can master the skills.
The amount of cotton is not good.
Many novice users mistakenly believe that more cotton can store more e-liquid and increase the number of suction ports after each drop. In fact, if the amount of cotton is too tight, it will reduce its oil-conducting capacity and the absorption capacity of e-liquid. At the same time, it will also have the disadvantage of blocking the intake air from occupying the atomization space. The right amount and fluffy cotton can have excellent ability to absorb and conduct e-liquid.
RDA can adjust e-liquid?
Can not blend, RDA is the atomizer of the lungs connected to the lungs, the blending is to use tobacco oil and pure VG (glycerin) to stop blending, glycerin is no taste, the role is to increase the amount of smoke, if you Just for smoking, you don't have to adjust. If you want to play more hot silk and play with big smoke, you can stop blending according to your taste. There is no e-liquid adjustment method. The more the glycerin is, the less the original flavor of the e-liquid will be.
Why is the RDA hot?
Ordinary RDAs are much shorter than oil atomizers and finished products. Moreover, the calorific value is large. In the process of continuing smoking, the hot wire has not completely cooled up, and the ignition is stopped again. The accumulation of heat is completely normal. However, players with multiple devices should carefully reflect whether there is a short-circuit between the hot-wired joints before closing the position. This kind of scene will also have a high-heat scene, and it is easy to blow the wire, there is still a certain risk. If it is really hot, because the output power of the machine rod cannot be changed, reduce the number of hot wires, perhaps reduce the resistance, and add more cotton to the cotton core to add cooling speed. High-power electronic pole players, trying to reduce the input power, can be handled normally.
