vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,749
Hey guys! This time let's look at a new AIO pod mod system named Hugo Vapor Kylin Kit. It would be a good choice if you are looking for a nice looking and handy device for vaping on the go. Ok, here we go!
Hugo Vapor Kylin Kit is a very beautiful AIO device with colorful side panels. Powered by a built-in 1000mAh battery, it can fire from 5-30W and last a long vaping time. To adjust the output power, you have to remove the front panel first, as the adjustment buttons are behind it. Alongside the buttons, there is also a 0.49" OLED screen to show the essential vaping data. The fire button is located on the side of the device, below it is a Type-C USB port for charging and an LED indicator light to show the battery level. For safety, the device also comes with a range of safety features, so there is nothing to worry about.
As for the pods, they are available in two types in the kit. Both of them can hold up to 3ml of e-juice and are refillable via a top filling port. However, the coils inside are different. The mesh pod integrates a 0.6ohm mesh coil while the regular pod is equipped with a 1.2ohm regular coil. All these coils are non-replaceable, this might be a bit wasteful but I can see the benefit to those who don't want messy hands or find changing coils too fiddly! At last, the airflow is sadly not adjustable on this kit, but that's nothing much for a pod system device. Overall, the Hugo Vapor Kylin is worth a shot.
Where to buy: https://vapesourcing.com/hugo-vapor-kylin-kit.html
Parameters
Material: 6063 Aluminum + Resin
Size: 98mm x 43mm x 20mm
Battery: Built-in 1000mAh
Output Power: 5 - 30W adjustable
Output Voltage: 0 - 8.0V
Input Voltage: 3.3 - 4.2V
Screen: 0.49inch OLED Screen
Standby current: <10uA
Charging: Type-C port
Charging Output: DC 5V /1A
Charging Current: 900mA(MAX)
Resistance Range: 0.5-3.0ohm
E-liquid Capacity: 3.0ml
Filling: Top Fill System
Coil Types: 0.6ohm MTL mesh coil(max 30W), 1.2ohm regular coil(max 15W)
You may also like: hellvape grimm near me
Hugo Vapor Kylin Kit is a very beautiful AIO device with colorful side panels. Powered by a built-in 1000mAh battery, it can fire from 5-30W and last a long vaping time. To adjust the output power, you have to remove the front panel first, as the adjustment buttons are behind it. Alongside the buttons, there is also a 0.49" OLED screen to show the essential vaping data. The fire button is located on the side of the device, below it is a Type-C USB port for charging and an LED indicator light to show the battery level. For safety, the device also comes with a range of safety features, so there is nothing to worry about.
As for the pods, they are available in two types in the kit. Both of them can hold up to 3ml of e-juice and are refillable via a top filling port. However, the coils inside are different. The mesh pod integrates a 0.6ohm mesh coil while the regular pod is equipped with a 1.2ohm regular coil. All these coils are non-replaceable, this might be a bit wasteful but I can see the benefit to those who don't want messy hands or find changing coils too fiddly! At last, the airflow is sadly not adjustable on this kit, but that's nothing much for a pod system device. Overall, the Hugo Vapor Kylin is worth a shot.
Where to buy: https://vapesourcing.com/hugo-vapor-kylin-kit.html
Parameters
Material: 6063 Aluminum + Resin
Size: 98mm x 43mm x 20mm
Battery: Built-in 1000mAh
Output Power: 5 - 30W adjustable
Output Voltage: 0 - 8.0V
Input Voltage: 3.3 - 4.2V
Screen: 0.49inch OLED Screen
Standby current: <10uA
Charging: Type-C port
Charging Output: DC 5V /1A
Charging Current: 900mA(MAX)
Resistance Range: 0.5-3.0ohm
E-liquid Capacity: 3.0ml
Filling: Top Fill System
Coil Types: 0.6ohm MTL mesh coil(max 30W), 1.2ohm regular coil(max 15W)
You may also like: hellvape grimm near me
