vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,750
Guys, here comes a newest vape kit named Hugsvape Surge kit, which consists of 80W Surge squonk box mod and Piper BF RDA. Constructed by PC and glass fiber, there is a large display in the middle that has a vertically oriented menu system and includes indicators for current mode, wattage/temperature, coil resistance, current power, current amperage, and a puff counter.
Powered by single 18650 / 20700 battery (NOT INCLUDED), it is able to reach up to a maximum output power of 80W with a magnetic side panel that hides the battery bay and squonk bottle. The squonk bottle can hold up to 6ml of e-liquid and is made from silicone for health and to allow for effortless squeezing.
Moreover, the squonk box mod also supports these modes with a variety of protection: power, power curve, bypass, temperature control with stainless steel, temperature control with nickel, temperature control with titanium and TCR mode. As for the included Piper RDA, this rda features 24mm diameter and dual vertical coil, and its bottom airflow transfers to side airflow through the tube and then hits the coils directly from inside.
Parameters
Size: 79 x 54.4 x 25.7mm
Material: PC + Glass Fiber + Stainless Steel
Wattage range: 7~80W
Battery type: 1* 18650 / 20700 battery (NOT INCLUDED)
TC range: 100~315'C / 200~600'F
Standby current: less than 20uA
Maximum output voltage: 9V
Support modes: Power / W-VPC / Bypass / TC
Thread Type: 510
Order it now: https://vapesourcing.com/hugsvape-surge-kit.html.
Powered by single 18650 / 20700 battery (NOT INCLUDED), it is able to reach up to a maximum output power of 80W with a magnetic side panel that hides the battery bay and squonk bottle. The squonk bottle can hold up to 6ml of e-liquid and is made from silicone for health and to allow for effortless squeezing.
Moreover, the squonk box mod also supports these modes with a variety of protection: power, power curve, bypass, temperature control with stainless steel, temperature control with nickel, temperature control with titanium and TCR mode. As for the included Piper RDA, this rda features 24mm diameter and dual vertical coil, and its bottom airflow transfers to side airflow through the tube and then hits the coils directly from inside.
Parameters
Size: 79 x 54.4 x 25.7mm
Material: PC + Glass Fiber + Stainless Steel
Wattage range: 7~80W
Battery type: 1* 18650 / 20700 battery (NOT INCLUDED)
TC range: 100~315'C / 200~600'F
Standby current: less than 20uA
Maximum output voltage: 9V
Support modes: Power / W-VPC / Bypass / TC
Thread Type: 510
Order it now: https://vapesourcing.com/hugsvape-surge-kit.html.
