hybrid mod to go with heron clone?

[BD1]

Looking at getting a Heron clone from fasttech, anyone know any hybrid mods that are compatible? I'm hoping for something with a locking ring.

Many thanks.

 

[Audiopsyence]

Here's a list of 20x1 threading. I think it's pretty accurate

Anatolian Mods HIT IT LE BD (Caps, Tubes, Switches)- Cloud9/CaliVapers
The Art of Exhale Hybrid Titanium - ECF/The Art of Exhale
The Art of Exhale Hybrid Svarog Genesis Atomizer - ECF/The Art of Exhale
ARMODS Apache Mechanical Mod - Thanks Grayscale/AussieVapers
Bay City Vapor SurfRider - Thanks Grayscale/ECF
Bay City Vapor XXIX - Thanks Grayscale/ECF
Bear Brass Mods Lycan - Thanks Grayscale/ECF/AussieVapers
blacksmithmodz The Minotaur - Cloud9/VapeNoize
Caravela Mods Caravela
Da Iron Mod Copper Mod - Cloud9/Todds Reviews
Electric Angel EA - Need source/confirmation
Element Mods Elm Hybrid RDA - Element Mods
Element Mods Tree of Life - VapeRev/ECF
Fakirs Troy X Hybrid RDA - Fakirs
Fakirs FX 22 - Fakirs
JohnBoy & Dino CopperHead Hybrid - Cloud9/ECF
Golden Armour Mods Ember - Vapor Foundry/Todd's Reviews
GUS Battery Case/G22 Core - GUS site
GUS `ESTIA Atomizer - GUS site
GUS Lord - Thanks Grayscale/ECF
GUS Telescopic - GUS site
Holy Land Mods Ant - Thanks jmc007/Holy Land Mods
Holy Land Mods Initium - Thanks jmc007/Holy Land Mods
iHybrid Mods F3CTA (mod + genny) - Thanks Grayscale/ECF
iHybrid Mods Pure (mod + genny) - ECF
iHybrid Mods The Synthesis Genesis Atomizer - iHybrid
JM Mods JM22 - Thanks Grayscale/ECF
Laslomos Red Rod Mod - Thanks Grayscale/Need Confirmation
Kontrabida Kustom Signum Copper Mod- CaliVapers/ECF
LB Mods Versa Dripper Atomizer(V1) - Thanks Grayscale/ECF
Luxe Mods 18350 PV - Todd's Reviews
Luxe Mods Hybrid Dripper Atomizer - Thanks Grayscale/Todd's Reviews
MCR mods MCR-101 (Switch) - Thanks Grayscale/CalivapersMini
Ecig Hamoriko - Thanks Grayscale/Todd's Reviews
Paragon Mods Paragon 18650- Thanks Grayscale/CaliVaper
Rai Vapes Orochi - Thanks Toskaflak/Grayscale
Senio The Dripper Atomizer- Thanks Grayscale/ECF
Senio Wood Series (18350 Tube) - Senio
Sigelei #8
Sigelei #13
Sigelei #19
Smok-E Mountain Vanilla- Cloud9/CaliVapers
Team Rampage Ba gua
VapourArt GP Paps (1.0 - 2.5)
VapourArt GP Paps (Lux) - Thanks Grayscale/ECF
VapourArt GP Heron (Spheroid V2) - Thanks Grayscale/ECF
Versa Mods Versa Dripper (V2) - Thanks Grayscale/ECF
Versa Mods Versa Hybrid (V2) Mod + Genny - ECF
Versa Mods Versa SBS (Side By Side Accessory) - ECF/Vaping Craze
VJ Mods MISTer Hybrid (Mod + KF type Atomizer) - Thanks Grayscale/VJ Mods
Wings S1000 - Thanks Big_Black_Tools/Need Confirmation
Wishbone Scarab - Thanks jmc007/UKVapers (Wishbone)


Sent from my iPad using Planet of the Vapes

 

[Blackhack]

If you're buying from fasttech it's not essential to have a specific mod thread....It includes a converter for both....

• The M20x1 mm to 510 threading connector permits it to be used with 510 mods
• The M20x1 mm to M21x1 mm threading conversion ring permits it to be used with M21x1 mm threading mods

Unless you just want one that looks nice ??

 

[BD1]

If you're buying from fasttech it's not essential to have a specific mod thread....It includes a converter for both....

• The M20x1 mm to 510 threading connector permits it to be used with 510 mods
• The M20x1 mm to M21x1 mm threading conversion ring permits it to be used with M21x1 mm threading mods

Unless you just want one that looks nice ??

Yes, want one that looks nice

Caravela mod looks promising, will the fasttech clone have that M21 thread?

 

[Blackhack]

caravela will be fine and dandy......

 

[Ment]

If you're buying from fasttech it's not essential to have a specific mod thread....It includes a converter for both....

• The M20x1 mm to 510 threading connector permits it to be used with 510 mods
• The M20x1 mm to M21x1 mm threading conversion ring permits it to be used with M21x1 mm threading mods

Unless you just want one that looks nice ??

........and not too expensive............

 

[BD1]

OK i've settled on the following...

https://www.fasttech.com/products/1830408 - Version with nearly 5 stars, there's a cheaper version but i decided to go with product rating.

https://www.fasttech.com/products/1540703 - This appears to be the only Caravela on FT with 20x1 threading.

I'll be trying my hand at running in 18500 mode, looking for a smaller footprint which is why i'm going hybrid, and going 18500 should make my overall device shorter still. So i'm going to need some batteries and ordered the following...

2x KEEPPOWER IMR 18500 1100mAh 10/20A HIGH DRAIN 3.7 LiMN FLAT TOP BATTERIES UK | eBay Ordered 4 of these bad boys to keep me well stocked.

 

[Styx]

Just had two of the herons unbranded as this. One had a wobbly top cap due to the prongs. Use a bit of floss to go under the rings and they are superb. You'll love this vape, check ZT guide to set it up without filler, it's as good as a dripper in a tank.
Hate the different size pins on the caravella, get stingray X ( make sure it's the X version)better mech IMO

 

[BD1]

Just had two of the herons unbranded as this. One had a wobbly top cap due to the prongs. Use a bit of floss to go under the rings and they are superb. You'll love this vape, check @ZT guide to set it up without filler, it's as good as a dripper in a tank.
Hate the different size pins on the caravella, get stingray X ( make sure it's the X version)better mech IMO

My brother got a couple of genuine Herons and i was impressed by the flavour, but it's put me off Manabush, nice flavour but i'm getting a really strong sort of sweet after taste like too much Sucralose.

I'll check out his quide for sure

I'll see how i get on with this and if it's crap i'll look into a stingray clone, they come in 20x1 threading? Really looking to keep it in hybrid mode if possible.

 

[Styx]

My brother got a couple of genuine Herons and i was impressed by the flavour, but it's put me off Manabush, nice flavour but i'm getting a really strong sort of sweet after taste like too much Sucralose.

I'll check out his quide for sure

I'll see how i get on with this and if it's crap i'll look into a stingray clone, they come in 20x1 threading? Really looking to keep it in hybrid mode if possible.

If you mean the caravella clone in hybrid mode, then yes, same threading, I just tried it, but in hybrid mode the caravella won't accept torchy or efest batteries, they take up too much room in the tube.
The only possible workaround which I can't test is a 18350 or 18500 and a kick in a bigger tube.
Thought it was worth a mention.