pauly meatballs
Achiever
- Joined
- Jun 21, 2013
- Messages
- 1,634
Hi everyone, just a quick look at the Innokin 134 mini. This is a variable wattage 18350/18500 mod made from stainless steel.
This mod is available in the UK for around £80. It comes in the usual innokin flight case and arrives fitted with the 18500 tube with an optional 18350 tube and an innokin iclear x-i clearomiser.
This mod is inspired by the M134 gatling gun. Here's a nice pic of Jesse Ventura holding one:
Some specs:
Maximum output voltage：6.0V
Maximum output current：5.0A（Built in 7A fuse for protection and stability.）
Maximum output wattage ：12.5W
Resistance of clearomizer：1.2 ohm (minimum)
Battery: IMR high drain 18350/18500
10 second safety cut-out.
short circuit protection.
reverse battery protection.
121mm long (with 18500 tube)
diameter 24.5mm (around the battery tube)
diameter 19.7mm (at top cap)
No variable voltage on this mod, you can control your vape by wattage alone. It's adjusted by turning this clearly marked wheel, the wheel is marked with these settings: 7.0 , 8.0 , 8.5 , 9.0 , 9.5 , 10.5 , 11.0 , 12.0 , 12.5 .
One of my favourite features on the newer innokin mods is the spring loaded centre pin. Every atty I've tried on this mod has fit well with no gaps and fired first time.
The beauty ring can be removed for larger ego-threaded devices.
As you can see the beauty ring is quite narrow so your larger devices will feature a bit of an overhang. This device is severely shiny and favours polished atties over brushed (IMHO). With the included innokin iclear x-i it's almost shiny overload, especially outdoors!
The mod is operated via the usual innokin fire button. 3 clicks on/3 clicks off. The button will glow green when the battery is fully charged, amber when half discharged and red when the battery needs recharging. This feature is fine indoors but pretty useless outdoors in daylight as your thumb will obscure the button.
I bought this mod for the 18500 mode, here it is next to a couple of other innokins for size comparison:
If that's too long for you the bottom section can be easily removed and replaced with the 18350 tube:
Performance:
Feels great in the hand. Easily operated and completely reliable. Sturdy and quite weighty. I realise I've become a bit of an Innokin fan (perhaps more so with their mods than with their clearos). Every innokin mod I have works perfectly with no hassle. Now that they're featuring an adjustable centre post there's practically nothing negative I can say about them.
That's all I can think of to say on the Innokin 134 mini. I very much like this mod, it works perfectly and looks crazy. Thanks for reading this,
have a great day,
Paul
