Introducing The YODA RDA

[stealthvape]

http://www.stealthvape.co.uk/rebuildable-atomizers/yoda-era-rebuildable-dripping-atomizer



If you're on a tight budget or need a cheap emergency backup you don't need to think twice about getting one of these. Don't be fooled by the price though, it's still a well made little dripping atomizer. Solidly made from stainless steel, featuring double orings and allen screws for the wire posts. Measuring up at 22.5mm tall (not including the drip tip or 510 connector) and only 14.35mm in diameter.
As with other atomizers of this type it comes with a coil prebuilt using rubbish wick and an unknown type of wire so do yourself a favour and buy some of the good stuff, 2mm wick and .15mm to .20mm kanthal or nichrome will be about right. You can find all these in our rebuildable supplies section.
The YODA comes apart into 3 pieces. They are
The drip tip
Cover
Bottom section with wire terminals and 510 connector.
The YODA also comes with a small allen key to be used on the posts.

http://www.stealthvape.co.uk/rebuildable-atomizers/yoda-era-rebuildable-dripping-atomizer

 

[SouthernVaper]

rubbish name lol

 

[Merino-Teflon]

By which you mean best name ever, whoever came up with it should be knighted Sir Better Than SouthernVaper.

 

[Lord Grim]

It's not a bad name, but not as good as ERAtic.....goddam popularity contests

On a more serious note, this is what I had in mind when I said about an SS Octopus for the Matrix 3

 

[Merino-Teflon]

It's not a bad name, but not as good as ERAtic.....goddam popularity contests

On a more serious note, this is what I had in mind when I said about an SS Octopus for the Matrix 3

Not that it helps, but my favourites (other than mine) were Vera, Tiara, and ERAtic.

Yup, the dimensions for this sound good to me, and the drip tip sets it off nicely.

Edit: I'll try and do a little review for it once received.

 

[SouthernVaper]

as it happens I like the name and the atty too