escape2vapour
Postman
- Joined
- Jun 8, 2015
- Messages
- 120
IPV5 200w Box Mod By Pioneer4You - £41.99
The iPV5 200W TC Box Mod by Pioneer4you is HERE!!
It has the Yihi SX330-200 Chip, temp control functions are ready to go for SS/Ni200/Ti wire.
It is the progressive evolution from the sensational iPV series, capable of delivering an impressive 200 watts of power.
The iPV5 was engineered to encompass a huge power range using dual 18650 batteries for a greater power ceiling in comparison to previous iPV box mods.
Under normal use and temperature control setting, the new Yihi SX330-200 chip is capable of extreme precision and efficiency ratings for personalized regulation.
The iPV5 is cleverly built with an intuitive OLED display and ergonomic layout for a seamless vaping experience.
Following the famous iPV4 from their iPV line of box mods comes the iPV5, featuring a max 200W output, the iPV5 provides a ton of power in an ergonomic fashion.
Utilizing the SX300-200 chipset that handles with great efficiency and performance.
The upgradeable firmware adds versatility to this powerful unit to keep up with the fast paced vaping market.
To power the iPV5 200W mod, (2) 18650 batteries are required (batteries sold separately) and are replaced via the strong and sturdy magnetic battery panel located on the side of the unit.
Besides the raw power, ergonomic design, versatile and precise chip, the user also has access to a multitude of protection features to be vaping safe 24/7.
Note: The micro USB port on this unit is for FIRMWARE UPDATES ONLY.
Specifications:
The iPV5 200W TC Box Mod by Pioneer4you is HERE!!
It has the Yihi SX330-200 Chip, temp control functions are ready to go for SS/Ni200/Ti wire.
It is the progressive evolution from the sensational iPV series, capable of delivering an impressive 200 watts of power.
The iPV5 was engineered to encompass a huge power range using dual 18650 batteries for a greater power ceiling in comparison to previous iPV box mods.
Under normal use and temperature control setting, the new Yihi SX330-200 chip is capable of extreme precision and efficiency ratings for personalized regulation.
The iPV5 is cleverly built with an intuitive OLED display and ergonomic layout for a seamless vaping experience.
Following the famous iPV4 from their iPV line of box mods comes the iPV5, featuring a max 200W output, the iPV5 provides a ton of power in an ergonomic fashion.
Utilizing the SX300-200 chipset that handles with great efficiency and performance.
The upgradeable firmware adds versatility to this powerful unit to keep up with the fast paced vaping market.
To power the iPV5 200W mod, (2) 18650 batteries are required (batteries sold separately) and are replaced via the strong and sturdy magnetic battery panel located on the side of the unit.
Besides the raw power, ergonomic design, versatile and precise chip, the user also has access to a multitude of protection features to be vaping safe 24/7.
Note: The micro USB port on this unit is for FIRMWARE UPDATES ONLY.
Specifications:
- Requires (2) 18650 Batteries (Batteries Sold Separately)
- Magnetic Battery Panel
- Spring Loaded 510 Pin
- Wattage Range: 10W – 200W
- Joule Range: 10J – 120J
- Resistance Range:
- 0.15Ω – 3.0Ω (VW Mode)
- 0.05Ω – 1.5Ω (TC Mode)
- Voltage Range: 1.0V – 7.0V
- Temperature Range: 212°F – 572°F / 100°C – 300°C
- Utilizes The SX330-200 Chipset
- OLED Screen
- Micro USB Port (For Upgrading Firmware Only)
- Temperature Control Compatibility
- Compatible With Nickel, Titanium, & Stainless Steel
- Firmware Upgradeable
- Input Voltage: 6.4V – 9.0V
- Output Current: 1.0A – 45A
- Input Current: 1.3A – 45A
- TCR Value: 0.00050 – 0.00700
- Protection Features:
- Low Voltage Protection
- Low Resistance Protection
- High Input Voltage Protection
- Output Short Circuit Protection
- Reverse Battery Protection
- Temperature Overheat Protection
- 1 x iPV5 200W Mod by Pioneer4You
- 1 x Micro USB Cable
- 1 x User Manual
- 1 x Warranty Card
