vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,749
Guys, good day! This time we'll be covering the Hcigar KRIS Kit. If you're looking for a reliable and cheap pod system that has a good hand feeling, then you shouldn't miss it.
Hcigar KRIS Kit incorporates superior zinc alloy unibody with premium leather that is loved for its flexibility and durability. Powered by a 650mAh built-in battery, it has a constant voltage output of 3.3V. The battery is charged via the Micro USB port on the bottom of the device. And there is a smart LED indicator light near the bottom to show the battery level. KRIS also boasts four vibration reminder functions. It reminds you when you insert the pod which is a magnetic connection, connect the charging cable, inhale longer than 10 seconds or take 15 puffs at a time.
As for the pod, it can hold up to 2mL of e-juice with double filling-hole design. Moreover, it features a special condensation holder, which stores rising e-juice before sending it back to the coil for atomization again. The coil inside the pod has a resistance of 1.8ohms, very suitable for e-liquids with high nicotine concentration or nic salts. Finally, the inverted U-shaped cotton greatly improves the use of e-liquid as this shape can fully contact and absorb it.
Where to buy: https://vapesourcing.com/hcigar-kris-kit.html
Parameters
Dimensions: 83 x 35 x 16mm
Case material: zinc alloy + "skin" + plastic
Power: Built-in 650mAh
Cartridge capacity: 2.0ml
Evaporator resistance: 1.8ohm
Voltage range: 3.7V
Operating mode: POWER
Protection: from low/high resistance, from overheating, from short circuit, from overcharging / over-discharge
Connector type: magnetic
Color: Silver, Red, Gun Metal
You may also like: aspire nxt vape cena
Hcigar KRIS Kit incorporates superior zinc alloy unibody with premium leather that is loved for its flexibility and durability. Powered by a 650mAh built-in battery, it has a constant voltage output of 3.3V. The battery is charged via the Micro USB port on the bottom of the device. And there is a smart LED indicator light near the bottom to show the battery level. KRIS also boasts four vibration reminder functions. It reminds you when you insert the pod which is a magnetic connection, connect the charging cable, inhale longer than 10 seconds or take 15 puffs at a time.
As for the pod, it can hold up to 2mL of e-juice with double filling-hole design. Moreover, it features a special condensation holder, which stores rising e-juice before sending it back to the coil for atomization again. The coil inside the pod has a resistance of 1.8ohms, very suitable for e-liquids with high nicotine concentration or nic salts. Finally, the inverted U-shaped cotton greatly improves the use of e-liquid as this shape can fully contact and absorb it.
Where to buy: https://vapesourcing.com/hcigar-kris-kit.html
Parameters
Dimensions: 83 x 35 x 16mm
Case material: zinc alloy + "skin" + plastic
Power: Built-in 650mAh
Cartridge capacity: 2.0ml
Evaporator resistance: 1.8ohm
Voltage range: 3.7V
Operating mode: POWER
Protection: from low/high resistance, from overheating, from short circuit, from overcharging / over-discharge
Connector type: magnetic
Color: Silver, Red, Gun Metal
You may also like: aspire nxt vape cena
