"jack" a pure wood 18650 clickfet squonker mod

[vapesmarter]

here is the making thread

https://www.planetofthevapes.co.uk/...pure-wood-stabwood-18650-squonker-mod.183705/

the mod is a clickfet type from mod maker which lets you switch on and off short protection low battery, etc

specs are

- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection: Yes. The board will not operate.
- In Use: When powering the mosfet the LEDs will be on.

you can't see the LED as its a wooden mod

the board will not let you change the power so its full power this is adjusted by the coil etc but ohms law must be observed

its made by me and only me from start to finish, I'm a registered company with HMRC and I comply with CCA and payment via good and services

postage recorded £4.55 special delivery £8.60

comes to you boxed bagged with spares and of course a plus 10 squonk bottle

my warranty is my normal company one listed on my website

cost of the mod is £95 plus postage

pictures of the actual mod

I will leave this here for a while then it will be advertised on my website at the RRP

this is a one-off mod never to be done again

 

[crustyfolker]

Quality this is Stu and a decent price. I will be moving soon mate but not to far away hoping to have some cash left over after then i will place an order

 

[vapesmarter]

withdrawn