Juice help please

[Ruby]

Hi can anyone tell me the best juice to use in an innokin endura T20s. 70/30 50/50 etc


Thanks

 

[ForestMagpie]

Hi can anyone tell me the best juice to use in an innokin endura T20s. 70/30 50/50 etc


Thanks

Hello and welcome! Depends on which coil you are using. If you are using the 1.5ohm coil you are better off using 50/50. If you're using the 0.8 then a higher VG content more like 70vg/30pg. Which coil do you have in?

 

[Ruby]

Hello and welcome! Depends on which coil you are using. If you are using the 1.5ohm coil you are better off using 50/50. If you're using the 0.8 then a higher VG content more like 70vg/30pg. Which coil do you have in?

Oh hi thanks for that. Don’t have any in at mo it’s my daughter was asking. She wants to buy a new one she is used to pen styles. I couldn’t help because i use bigger and DTL

 

[Ruby]

Oh hi thanks for that. Don’t have any in at mo it’s my daughter was asking. She wants to buy a new one she is used to pen styles. I couldn’t help because i use bigger and DTL

Can you tell me what the difference in coils means for her in MTL

 

[MrDJ]

mouth to lung just like a cig with 1.8, 1.6, 1.5, 1.2ohm coil = low wattage 10-14watts = higer nicotine 9,12,18mg best 50/50
direct to lung = 0.2, 0.5, 0.25ohm coil = higher wattage 20-100watt depending on kit = lower nicotine like 3-6mg = 70vg and bigger clouds

 

[Ruby]

mouth to lung just like a cig with 1.8, 1.6, 1.5, 1.2ohm coil = low wattage 10-14watts = higer nicotine 9,12,18mg best 50/50
direct to lung = 0.2, 0.5, 0.25ohm coil = higher wattage 20-100watt depending on kit = lower nicotine like 3-6mg = 70vg and bigger clouds

That’s perfect Thankyou great help.

 

[Ruby]

That’s perfect Thankyou great help.

Sorry can I just ask the 0.8 coil you said prob higher like 70/30. Is that for that device the endura t20s. And is that still MTL. sorry it’s just I thought that device was only MTL

 

[MrDJ]

Sorry can I just ask the 0.8 coil you said prob higher like 70/30. Is that for that device the endura t20s. And is that still MTL. sorry it’s just I thought that device was only MTL

im not sure on the 0.8 as ive never used that kit.
looking here its a fixed 18watts kit which takes the 0.8 coil. it does say sub ohm coil for mouth to lung https://www.vapeclub.co.uk/vape-kits/innokin/endura-t20-s
it also says compatable with high PG so i dont think it will handle high VG but i could be wrong.

edit

then the tank shows different https://www.vapeclub.co.uk/vape-tanks/innokin/endura-t20-s

Optimised for use at low wattages, there's the option of a pre-installed 0.8 Ohm Prism-S coil as well as a spare 1.5 Ohm Prism T20 coil. We recommend high PG eliquids of 50% and above for best performance.

We recommend that when sub ohm vaping, you do not use an e-liquid that has higher than a 6mg nicotine strength, this will be too harsh on the throat. Sub ohm vaping produces more vapour and because of this, an increased throat hit. You should pair tanks like this with a high VG e-liquid, that is 60% VG or higher.

 

[Ruby]

Oh goodness I’m no good at all this I have my set ups took a time to get there and I won’t budge now but I’m happy. Well if I say all she’s been used to is the vape pen by blu so it’s just fill and go. So judging by what your saying for her it would be better to use the 1.5 and use 50/50 Cos she uses 18mg juices. Does that sound right

 

[Ruby]

Oh just read on the vape club link that it comes with two 0.8 Not any others and to use 50pg or higher so guess it’s the 0.8 then