Kayfun Lite problem

[Vaped Crusader]

Guys, I just tried to top up a little and the juice isn't going down the hole. The first drop just sits there. I took the top off and the small rubber 'O' seal ring thingy had come away so I out it back into place and tried again with the same result. So again I undid it and again it had come away. Then I tried again but the juice still wouldn't go through the hole. It seems that suddenly the small rubber 'O' Ring is coming out rather easily..........But even when it doesn't come out, the juice doesn't go through the hole...........Help please?

 

[Dan Dan the vaping man]

Where are you filling it from ? As it should just be to fill from the bottom after taking out the screw and covering the air hole so liquid doesn't flood the main chamber :what:

 

[Vaped Crusader]

Yeah i'm taking out the screw but the juice just isn't going in. I didn't know about covering the airhole, but then again I never put much juice into it at any one time anyway. I tried covering the airhole after seeing your post but either way, airhole covered and uncovered, the juice isn't going in

 

[Dan Dan the vaping man]

Yeah i'm taking out the screw but the juice just isn't going in. I didn't know about covering the airhole, but then again I never put much juice into it at any one time anyway. I tried covering the airhole after seeing your post but either way, airhole covered and uncovered, the juice isn't going in

Oh :what:
Well I'd take the whole thing apart and have a look down the hole to see what's blocking it as I'm able to stick a needle down the hole with enough room to rattle about

Hope you get it sorted soon must be doing your head in

 

[Vaped Crusader]

Oh :what:
Well I'd take the whole thing apart and have a look down the hole to see what's blocking it as I'm able to stick a needle down the hole with enough room to rattle about

Hope you get it sorted soon must be doing your head in

Yeah i've tried that. I guess i'll try taking it apart and giving it a good clean, rewick it and see what happens.

 

[Vaped Crusader]

Ah ha!

I just unscrewed the chimney bit and case that goes around the wick, blew on it, reassembled it and it works fine. For now.

Wonder what it was..........

 

[Dan Dan the vaping man]

Yeah i've tried that. I guess i'll try taking it apart and giving it a good clean, rewick it and see what happens.

Yeah you should be able to see through the hole

Just to add if you have a needle or needle bottle use one as I find I have to put more force when squeezing liquid in as there is no room for air to escape

 

[Dan Dan the vaping man]

Ah ha!

I just unscrewed the chimney bit and case that goes around the wick, blew on it, reassembled it and it works fine. For now.

Wonder what it was..........

Maybe a bit of upturned wick or a spider decided to clump in for a kip lol

Glad you got it sorted

 

[shah.paracha]

Try reading this from an electronic cigarette reviews site, may help you out http://vapedrone.com/kayfun-3-1-review/