vapeciga.com
Initiate
- Joined
- Aug 30, 2019
- Messages
- 43
How to make electronic smoke core
1. First, prepare the RBA atomizer and operating station. Of course, you can also use the pressure regulator as the operating station. The difference is that the 521 mini is lower in height and more stable in operation. (it is not recommended to use mechanical pole as operating platform. Mechanical pole is not equipped with protective circuit, which may be dangerous to some extent.)
2. Next, prepare the heating wire and bevel scissors. If you don't have a bevel clipper, you can use nail clippers instead, but you can't cut your nails as hard.
Tips: a lot of novice friends are more tangled, heating wire model and material so much, how should you choose? The principle is: suck with fine silk, big smoke with thick silk, adjust pressure with adjust pressure wire, temperature control with temperature control wire.
First, you can choose according to the purpose of your atomizer:
A. The filament 30ga-26ga (0.25-0.4mm) for "mouthfeel atomizer" is recommended to use 28Ga (0.32mm), which is suitable for almost any mouthfeel type RBA, single or double hair, strong adaptability and stable taste. 26Ga (0.4mm) is not recommended, because it will be much lighter on multiple mouthfeel atomizers.
B, "smoke atomizer" whether oil storage smoke or oil droplets smoke usually use coarse wire. The majority of vapers use 22Ga (0.6mm) in daily life. If they are worried about the low double resistance value, they can also start with 24Ga (0.5mm) and use 22Ga after they are proficient.
The life of the electronic fume core
The life of the atomizing core determines the use cost of e-cigarettes, and the price of most finished atomizing cores is about 20 yuan. (the price of atomization core of different brands and models varies, please refer to the price of merchants.) normally, the service life of finished atomization core should be about 7 days to half a month. However, the life of the core can vary depending on the frequency of use and the amount of smoke used.
RBA atomization core because each person's habits is different, life difference is bigger, some people like change once every day, or even once a bunker oil change, and some people change 3 to 5 days, of course, there are "lazy", such as the half a month or even a month to change, "they can smoke", often at the time of change atomization core "gruesome".
Which factors affect the life of the core
No matter the finished product or RBA made by itself, the life of atomization core is not fixed and will vary with the user's usage habits. The same atomizer, the same atomization core, some people may use half a month, and some people can only use three days. So what factors affect the life of atomization core?
A. power. The atomizing core has a certain power range, which is usually marked on the shell of the atomizing core. Such as 1.6 Ω, 8-15 w, this annotation is representative of the finished product atomization core resistance value is 1.6 Ω, the official recommendation for 8 w - 15 w. Users can find their favorite mouthfeel within this power range to use.
If the output power set by the user is too high, then the high temperature generated by the coil will excessively evaporate the smoke oil, and the surrounding cotton will burn the cotton before it has time to replenish the smoke oil, resulting in a mushy taste, affecting the taste and taste.
B. smoke oil. The biggest effect of smoke oil on atomization core life is "carbon deposition". The oil is transported through the cotton to the coil, where it is heated to create fog, which also forms a black substance on the coil due to the high temperature, known as "carbon deposit". Although the basic ingredients of tobacco oil are the same, the raw materials and additives of tobacco oil vary from brand to brand, resulting in different rates of carbon accumulation. For example, "Malay tobacco oil" is recognized as "high carbon content" tobacco oil due to the variety characteristics of flavor and high sugar content. There have been players reported that using the finished taste atomizer to use Malay smoke oil, 1-2 days to replace a atomization core, directly call "can't hurt".
Carbon deposition will affect the heating efficiency of the coil and the taste of vaporized smoke, which will degrade the taste and performance of the atomizer. However, this phenomenon of carbon deposition cannot be completely avoided due to the limitation of heating method, so carbon deposition has a great impact on the life of the atomization core. Therefore, if Malay smoke oil is used, please try your best to use it with RBA atomizer. Even if carbon accumulation is formed quickly, which affects the taste and use, an atomization core can be rebuilt in a few minutes, which is much cheaper than the use cost of the finished atomization core.
https://www.vapeciga.com/products/myuz-hadar-rda-25mm
1. First, prepare the RBA atomizer and operating station. Of course, you can also use the pressure regulator as the operating station. The difference is that the 521 mini is lower in height and more stable in operation. (it is not recommended to use mechanical pole as operating platform. Mechanical pole is not equipped with protective circuit, which may be dangerous to some extent.)
2. Next, prepare the heating wire and bevel scissors. If you don't have a bevel clipper, you can use nail clippers instead, but you can't cut your nails as hard.
Tips: a lot of novice friends are more tangled, heating wire model and material so much, how should you choose? The principle is: suck with fine silk, big smoke with thick silk, adjust pressure with adjust pressure wire, temperature control with temperature control wire.
First, you can choose according to the purpose of your atomizer:
A. The filament 30ga-26ga (0.25-0.4mm) for "mouthfeel atomizer" is recommended to use 28Ga (0.32mm), which is suitable for almost any mouthfeel type RBA, single or double hair, strong adaptability and stable taste. 26Ga (0.4mm) is not recommended, because it will be much lighter on multiple mouthfeel atomizers.
B, "smoke atomizer" whether oil storage smoke or oil droplets smoke usually use coarse wire. The majority of vapers use 22Ga (0.6mm) in daily life. If they are worried about the low double resistance value, they can also start with 24Ga (0.5mm) and use 22Ga after they are proficient.
The life of the electronic fume core
The life of the atomizing core determines the use cost of e-cigarettes, and the price of most finished atomizing cores is about 20 yuan. (the price of atomization core of different brands and models varies, please refer to the price of merchants.) normally, the service life of finished atomization core should be about 7 days to half a month. However, the life of the core can vary depending on the frequency of use and the amount of smoke used.
RBA atomization core because each person's habits is different, life difference is bigger, some people like change once every day, or even once a bunker oil change, and some people change 3 to 5 days, of course, there are "lazy", such as the half a month or even a month to change, "they can smoke", often at the time of change atomization core "gruesome".
Which factors affect the life of the core
No matter the finished product or RBA made by itself, the life of atomization core is not fixed and will vary with the user's usage habits. The same atomizer, the same atomization core, some people may use half a month, and some people can only use three days. So what factors affect the life of atomization core?
A. power. The atomizing core has a certain power range, which is usually marked on the shell of the atomizing core. Such as 1.6 Ω, 8-15 w, this annotation is representative of the finished product atomization core resistance value is 1.6 Ω, the official recommendation for 8 w - 15 w. Users can find their favorite mouthfeel within this power range to use.
If the output power set by the user is too high, then the high temperature generated by the coil will excessively evaporate the smoke oil, and the surrounding cotton will burn the cotton before it has time to replenish the smoke oil, resulting in a mushy taste, affecting the taste and taste.
B. smoke oil. The biggest effect of smoke oil on atomization core life is "carbon deposition". The oil is transported through the cotton to the coil, where it is heated to create fog, which also forms a black substance on the coil due to the high temperature, known as "carbon deposit". Although the basic ingredients of tobacco oil are the same, the raw materials and additives of tobacco oil vary from brand to brand, resulting in different rates of carbon accumulation. For example, "Malay tobacco oil" is recognized as "high carbon content" tobacco oil due to the variety characteristics of flavor and high sugar content. There have been players reported that using the finished taste atomizer to use Malay smoke oil, 1-2 days to replace a atomization core, directly call "can't hurt".
Carbon deposition will affect the heating efficiency of the coil and the taste of vaporized smoke, which will degrade the taste and performance of the atomizer. However, this phenomenon of carbon deposition cannot be completely avoided due to the limitation of heating method, so carbon deposition has a great impact on the life of the atomization core. Therefore, if Malay smoke oil is used, please try your best to use it with RBA atomizer. Even if carbon accumulation is formed quickly, which affects the taste and use, an atomization core can be rebuilt in a few minutes, which is much cheaper than the use cost of the finished atomization core.
https://www.vapeciga.com/products/myuz-hadar-rda-25mm
