No flavour - or burning

[Steve_Fowler]

Hi There,

I'm a complete newby to the vaping world. I bought a Vaporesso Tarot Nano a week ago and although initially loved the flavour I've had a couple of issues I was hoping someone could help me out with?

I seem to have great flavour for the first couple of puffs, but then it swaps between no flavour or a burning taste in my throat. I've tried changing the wattage between 25 - 50 but can't find a spot that stops this issue. I've also ensure the battery is charged, changed the coil, the liquid but still this doesn't prevent it.

I normally vape between 1-2 5ml tanks a day, which I don't think is that much and vape the same way I would normally smoke a cigarette (medium sized inhaled puffs).

Any advice would be really appreciated

Cheers,

Steve

 

[Enoch]

Hi There,

I'm a complete newby to the vaping world. I bought a Vaporesso Tarot Nano a week ago and although initially loved the flavour I've had a couple of issues I was hoping someone could help me out with?

I seem to have great flavour for the first couple of puffs, but then it swaps between no flavour or a burning taste in my throat. I've tried changing the wattage between 25 - 50 but can't find a spot that stops this issue. I've also ensure the battery is charged, changed the coil, the liquid but still this doesn't prevent it.

I normally vape between 1-2 5ml tanks a day, which I don't think is that much and vape the same way I would normally smoke a cigarette (medium sized inhaled puffs).

Any advice would be really appreciated

Cheers,

Steve

what liquid are you using?

What reistance is the coil? (normally gives a wattage range on the side of it)

 

[Shetland_stuart]

Not sure what tank comes with that kit, but sounds to me like the op is MTL vaping on what is probably a DTL tank, so not enough airflow being created thus cooking the juice

 

[Enoch]

Not sure what tank comes with that kit, but sounds to me like the op is MTL vaping on what is probably a DTL tank, so not enough airflow being created thus cooking the juice

I've never heard of 'cooking' the juice by inhaling it different? Perhaps i am learning something new.

i thought if you are MTL on a DL tank all that would cause is a build up of vapour as it wasn't clearing quick enough?

 

[Steve_Fowler]

what liquid are you using?

What reistance is the coil? (normally gives a wattage range on the side of it)

I've used 3 different ones;
Skettles (strawberry flavour)
One that is basically Orangina
A Mr Frosty strawberry one

for the coils I've got these;
0.4 ohm 40w-50w
https://www.ebay.co.uk/itm/VAPORESS...-4-0-5-0-6-ohm-Free-UK-Day-Post-/322401909525

I bought everything from a vape shop and they changed the coil so know I haven't messed that up

 

[Shetland_stuart]

I could be wrong but that's what it sounds like to be hopefully another more knowledgeable ape will be along to help

 

[Steve_Fowler]

Also tried opening and closing the airflow to see if that makes a difference.

@Shetland_stuart it's a VECO tank and it should be a direct to lung device

 

[MrDJ]

not seen or used this tank so its all guess work https://www.vaporesso.com/vape-atomizers-vape-tanks-veco-vape-tank

are you priming the coil by dripping juice in and around the coil and then starting at a much lower wattage than you vape at then turn up a few watts each puff.
sounds like its burning out too quick so check the juice bottles for the ratio of vg/pg
even with ceramic coils 70vg should be the max. 80vg is just too thick and will struggle to soak up into the coil quick enough so it just burns out.

also, buying from ebay you take your chances. there are plenty of fakes out there.
post 5 you can find all our tried and tested suppliers POTV Vendors & Recommended E Liquid Suppliers

 

[Steve_Fowler]

not seen or used this tank so its all guess work https://www.vaporesso.com/vape-atomizers-vape-tanks-veco-vape-tank

are you priming the coil by dripping juice in and around the coil and then starting at a much lower wattage than you vape at then turn up a few watts each puff.
sounds like its burning out too quick so check the juice bottles for the ratio of vg/pg
even with ceramic coils 70vg should be the max. 80vg is just too thick and will struggle to soak up into the coil quick enough so it just burns out.

also, buying from ebay you take your chances. there are plenty of fakes out there.
post 5 you can find all our tried and tested suppliers POTV Vendors & Recommended E Liquid Suppliers

sorry - the ebay link was just to show which coils I used - I went to a vape shop to buy everything. the owner said I didn't need to prime the coils and instead just dropped a drop of eliquid into the coil.

The juice is 70vg

 

[MrDJ]

it should handle it then. ive only started using the vaporesso cascade ceramic coil this week and it kicks ass at 70watts but they still need priming and starting low and turning up slowly so it lets them bed in.