3avape
Achiever
- Joined
- May 3, 2017
- Messages
- 1,645
Product introduction
Smoant Santi Kit powered by built-in 1100mAh battery that provides enough energy for the day.Equipped with developed ANT CHIP which will be able to deliver a maximum of 40W and can be ignited instantaneously within 0.015S, no delay was felt. Type-C port on the left side of the device provide fast charging.Smoant Santi Kit made of strong zinc alloy and decent fabric skin, firm grip, wear-resistant and leave no trace.0.96" TFT screen on the front of the device and the adjustment buttons on the side simplify operation and settings.Smoant Santi Kit can holds 3.5ml capacity.Magnetic pod connection which can be refilled multiple times and features an anti-leak filling mechanism.It is compatible with the newly designed Smoant S series coils.On the cartridge is an airflow control slider to set the airflow.As for the Coil,four types of coils from 0.4ohm to 1.2ohm. There are also S-RBA for DIY fun, and creatively use new wire material ERNiCrMo with mesh structure, prolongs the service life of the wire, and brings a pure and consistent flavor experience
Parameters:
Size: 104mm x 28mm x 18.5mm
Capacity:3.5ml
Mod Material:Zinc Alloy+PCTG
Pod Material
CTG
Battery :1100mAh built-in
Output Power:1-40W
Resistance Range:0.3-3.0ohm
Resistance:0.6ohm
Coil
-1; S-2(Pre-install); S-3; S-RBA
Output Mode:VW(POWER)/ DVW
Charging:Type-C, 5V/1A
Chipset:Ant Chip
Screen Size:0.96" OLED
Features:
-Compact size with 1100mAh battery for whole day using
-Innovative ERNiCrMo, best flavor and longer lifespan
-Support 4 new dedicated coils, included RBA
-Independent Air-Flow Control System, satisfied from MTL to DL.
-0.96” colorful TFT screen and 5 theme Ui
-3.5ml cartridge with strong magnet, always be simple
-New fabric sticker, all stylish and beautiful
-Ant-Chip for your intelligent vape life
Package includes:
1 x Santi mod
1 x Santi 3.5ml Cartridge
1 x User manual
1 x Type-C Cable
1 x Certificated card
1 x Warranty card
1 x S-2 0.6ohm coil (pre-install)
Smoant Santi Kit powered by built-in 1100mAh battery that provides enough energy for the day.Equipped with developed ANT CHIP which will be able to deliver a maximum of 40W and can be ignited instantaneously within 0.015S, no delay was felt. Type-C port on the left side of the device provide fast charging.Smoant Santi Kit made of strong zinc alloy and decent fabric skin, firm grip, wear-resistant and leave no trace.0.96" TFT screen on the front of the device and the adjustment buttons on the side simplify operation and settings.Smoant Santi Kit can holds 3.5ml capacity.Magnetic pod connection which can be refilled multiple times and features an anti-leak filling mechanism.It is compatible with the newly designed Smoant S series coils.On the cartridge is an airflow control slider to set the airflow.As for the Coil,four types of coils from 0.4ohm to 1.2ohm. There are also S-RBA for DIY fun, and creatively use new wire material ERNiCrMo with mesh structure, prolongs the service life of the wire, and brings a pure and consistent flavor experience
Parameters:
Size: 104mm x 28mm x 18.5mm
Capacity:3.5ml
Mod Material:Zinc Alloy+PCTG
Pod Material
CTGBattery :1100mAh built-in
Output Power:1-40W
Resistance Range:0.3-3.0ohm
Resistance:0.6ohm
Coil
-1; S-2(Pre-install); S-3; S-RBAOutput Mode:VW(POWER)/ DVW
Charging:Type-C, 5V/1A
Chipset:Ant Chip
Screen Size:0.96" OLED
Features:
-Compact size with 1100mAh battery for whole day using
-Innovative ERNiCrMo, best flavor and longer lifespan
-Support 4 new dedicated coils, included RBA
-Independent Air-Flow Control System, satisfied from MTL to DL.
-0.96” colorful TFT screen and 5 theme Ui
-3.5ml cartridge with strong magnet, always be simple
-New fabric sticker, all stylish and beautiful
-Ant-Chip for your intelligent vape life
Package includes:
1 x Santi mod
1 x Santi 3.5ml Cartridge
1 x User manual
1 x Type-C Cable
1 x Certificated card
1 x Warranty card
1 x S-2 0.6ohm coil (pre-install)
