Pulse 24 bf kit

[Vape lord]

hi there guys. I've been vaping on different pens and mods for a year now. The one rebuild able one I had was a kanger tech Dripbox which was regulated and at 60w. I've jumped the gun and purchased a pulse 24 bf kit but want to know a few things. eBay is my main shopping site and I have bought: the mod itself which comes with a pulse 24 rda. I've got vaping cotton at home, and I bought some 0.5 ohm Clapton coils. I want to do a single coil build to begin with. I also bought an amp King battery. The question is, does this all sound safe to you and which coils do you recommend for this mod? I want it to be safe. I know how to set the coil up and how to wick it. Other than that I just know all the battery safety stuff and some basic ohm law. Any help?

 

[dannys242]

All sounds safe to me. Check out steam engine to help u work out battery limits with amps and such. I use pulse bf box with single coil around 0.15 to 0.18.

 

[BULLDOG1964]

and to the planet..

 

[EmbraSewerRat]

hi there guys. I've been vaping on different pens and mods for a year now. The one rebuild able one I had was a kanger tech Dripbox which was regulated and at 60w. I've jumped the gun and purchased a pulse 24 bf kit but want to know a few things. eBay is my main shopping site and I have bought: the mod itself which comes with a pulse 24 rda. I've got vaping cotton at home, and I bought some 0.5 ohm Clapton coils. I want to do a single coil build to begin with. I also bought an amp King battery. The question is, does this all sound safe to you and which coils do you recommend for this mod? I want it to be safe. I know how to set the coil up and how to wick it. Other than that I just know all the battery safety stuff and some basic ohm law. Any help?

As the device is semi mechanical you'll need to check to see what your claptons are made from.
If the cores are made from Nichrome or stainless steel then you're good to go, if they are kanth you are going to struggle to get a decent toot.
Have a look for Stealthvapes Brochrome wire, flattened nichrome and is finest kind kit for mechs. 24g is a good starting point.

Your battery is fine for 30A - rated that by Mooch - so as long as you build to 0.2 ohms and above - nae bothers.

Oh, and keep the contacts clean and be careful when filling the bottle it can be a bit tricksy, I've found unscrewing the bottle and keeping the tube and bottle cap attached to the 510 is the least messy way to refill.

 

[Cloudtastic]

Welcome dude

 

[Vape lord]

Guys thankyou so much! I spent some time looking at stuff on the internet about ohm law and stuff for ages. I was worried i'd end up blowing my face off but at least i now know how many ohms is safe. Heres a link to the coils i bought. Let me know what you think and could you also leave some links to your recommended coils on ebay uk/ amazon ? https://www.ebay.co.uk/itm/0-5ohm-C...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649