This gear hasn't really been used that much at all due to being out of the country and being lazy when I'm back (I keep using my iStick 50w instead)
Its a genuine Raffmods Ranger box mod, handmade and ordered from the US.
I am selling it as a package with my Nitecore D2 battery charger and 2x Samsung INR-18650 25R (2500mAh) batteries in a case. Basically the whole set of gear that you need to get going (other than a tank/dripper).
Ranger website specs: http://charger.nitecore.com/product/digicharger-d2
Nitecore D2 website specs: http://www.illumn.com/ranger-okr-t-10-regulated-box-mod-blue-box-blue-leds.html
Ranger Box Mod Specifications:
Nitecore D2 Charger Specifications:
I've hardly used this setup as I haven't been in the UK much since buying it so it is in an extremely good condition. No dents, marks or scratches on any of it at all. The box costs roughly £150 shipped from the states, the charger around £15, and the batteries another £10
I'm selling the lot for £100 OVNO posted, including PayPal fees and first class tracked/signed delivery, with it all packaged up securely in bubble-wrap and safely boxed.
Feel free to fire any questions over regarding this.
Its a genuine Raffmods Ranger box mod, handmade and ordered from the US.
I am selling it as a package with my Nitecore D2 battery charger and 2x Samsung INR-18650 25R (2500mAh) batteries in a case. Basically the whole set of gear that you need to get going (other than a tank/dripper).
Ranger website specs: http://charger.nitecore.com/product/digicharger-d2
Nitecore D2 website specs: http://www.illumn.com/ranger-okr-t-10-regulated-box-mod-blue-box-blue-leds.html
Ranger Box Mod Specifications:
- Optimized Murata OKR T/10 regulator with a custom engineered main board, capable of regular 80watt output.
- Overcurrent / Overvoltage protection
- Powder coated Hammond 1590G enclosure
- CNC leveled enclosure, no "Hammond lean"
- Dual 18650 series batteries (Samsung 25R/Sony VTC4 recommended [not included])
- Reverse polarity protection
- Undervoltage protection, wired into the remote on/off pin
- Master on/off switch
- Led ring lighted switch, lights when device is fired
- Led battery voltage/output voltage display, select-able via a slide switch
- Varitube spring loaded 510
- 0-100 marked flush mounted potentiometer, adjusts from ~3.4v to ~6v
- Magnetic cover
- Heat transferring compound between mainboard and enclosure
- Conformal coating applied to all internal components for added protection from water, e-juice and other contaminants.
Nitecore D2 Charger Specifications:
- Compatible with: IMR / Li-ion / LiFePO4 26650, 22650, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
- Ni-MH / Ni-Cd: AA, AAA, AAAA, C
- Input: AC 100-240V 50 / 60Hz, 0.25A(MAX) 8W, DC 12V 1A
- Output: 4.2V ± 1% / 3.7V ± 1% / 1.48V ± 1%, 0.5A*2
I've hardly used this setup as I haven't been in the UK much since buying it so it is in an extremely good condition. No dents, marks or scratches on any of it at all. The box costs roughly £150 shipped from the states, the charger around £15, and the batteries another £10
I'm selling the lot for £100 OVNO posted, including PayPal fees and first class tracked/signed delivery, with it all packaged up securely in bubble-wrap and safely boxed.
Feel free to fire any questions over regarding this.
