Rebuildable kits?

[ChrisA]

Found this Basic Coiling Kit, Is this any good to start with? are there any others like it that might be better?

thanks

 

[Rick0007]

Found this Basic Coiling Kit, Is this any good to start with? are there any others like it that might be better?

thanks

Seems ok but the kanthal would be the only thing worth getting imo, you buy wire from stealthvape for abot 2-3 quid, same legnth and pick up silica or cotton in loads of places for all sorts of prices.

I suppose it comes down to pastage costs.

Thats the miser in me though, for a fiver, just buy it lol

 

[EmbraSewerRat]

Pretty good to start off with, at least you're getting some organic cotton.
Off amazon ( spit, spit!) the equivalent is: Coil Rebuilding Kit for Clearomizer Coils Containing 1 Metre 1mm Silica Wick, 1 Metre 2mm Silica Wick and 2 Metres of Kanthal Wire: Amazon.co.uk: Health & Personal Care

You will soon end up buying several rolls of different gauge wire just to experiment with - Stealthvapes are good! - and John Lewis or your local health food shop will do you big packets of cotton for about 2 quid.

Go for it, have fun and watch out for wire clippings getting stuck in the carpet where your bare feets can 'find' them later.....

 

[pez]

Found this Basic Coiling Kit, Is this any good to start with? are there any others like it that might be better?

thanks

Go along to stealthvape for wire and coiling rods also silica or if you want the cotton route pop over to vaper caper for some Muji cotton wool. At least you will know if you go to the above vendors the stuff is good.

 

[pez]

Found this Basic Coiling Kit, Is this any good to start with? are there any others like it that might be better?

thanks

Go along to stealthvape for wire and coiling rods also silica or if you want the cotton route pop over to vaper caper for some Muji cotton wool. At least you will know if you go to the above vendors the stuff is good.

 

[Diche]

The Vape Mesh Co. Sell kanthal and cotton, and they also do their small amounts of kanthal on reels rather than card. I was warned when I put up a post that kanthal on card could make things tricky and now I have some experience I have to agree.

 

[ChrisA]

Cheers guys, i'll give them a look when I get my break later on as just about to start work.

 

[phlashbios]

For wire, I go here. Cheap as chips for a big spool of the stuff. Vaping Stuff They also do Ekowool, silica wick and stainless steel mesh/

 

[NINman]

I also use The Vape Mesh Co you should get everything you need there. What are you rebuilding might give a better understanding of what wire you need.

 

[ChrisA]

I also use The Vape Mesh Co you should get everything you need there. What are you rebuilding might give a better understanding of what wire you need.

Missed this somehow Trying to build something that my mvp 2 will fire, something in the 1.4 sort of area. Having some problems getting it to fire any of the builds I've done, it just keeps reading non when I go to check the ohms.
Think the calculators lie lol and that I should have got more wire. I didn't get the kit in the end just got some cotton and 1m of .32 kanthal