Repair on my MVP

[Clonfuddled]

I am looking for someone who can replace the 510/ego connection with a similar one just spring loaded.

Must be able to use 510 and ego threaded atties and be able to use the original beauty ring a well.

Thanks

 

[twoeyedbob]

your gonna struggle with this...510 connectors are easy enough to get,but i've not seen any ego/510's .
A connector from a bust vv3 might be the best way..although i've not tried it yet.
Take into consideration that you can get these new(with scratch panel) on ebay for £30 and it maybe doesnt make much financial sense spending money repairing one that presumably has a limited no of charges left on the battery

 

[Clonfuddled]

your gonna struggle with this...510 connectors are easy enough to get,but i've not seen any ego/510's .
A connector from a bust vv3 might be the best way..although i've not tried it yet.
Take into consideration that you can get these new(with scratch panel) on ebay for £30 and it maybe doesnt make much financial sense spending money repairing one that presumably has a limited no of charges left on the battery

Got a vw3 with the same problem as this mvp. I have resorted to ordering another mvp because at the moment I got no kit that I can say work and I can rely on, which is also why I am asking for this to either be repaired or have the 510 changed as the only thing wrong with the stooped 510 connection and threading.

 

[Ninjaassasin1983]

U can get an ego to ego adapter from stealth vape for 4quid it has a 510 on it too

Sent from my HTC One X using Planet of the Vapes mobile app

 

[Clonfuddled]

U can get an ego to ego adapter from stealth vape for 4quid it has a 510 on it too

Sent from my HTC One X using Planet of the Vapes mobile app

I know about the adapters, however it still needs fixing because the pin on the 510, the dodgy o-ring has finally gone. and just want to see if I can get a new one fitted hat has spring loaded as it would just make my life easier (I mean they do them on the coolfire 2's if I remember correct)

 

[twoeyedbob]

you can slide an o ring from an ego over the pin to fix it....was a thread here recently about it

 

[Clonfuddled]

yes but when the threads are going and atties wont screw on right you might as well get the whole thing sorted and replaced.

 

[Miss Pepper]

Tubbyengineer sparkyjuice is this your area

 

[Tubbyengineer]

I am looking for someone who can replace the 510/ego connection with a similar one just spring loaded.

Must be able to use 510 and ego threaded atties and be able to use the original beauty ring a well.

Thanks

I doubt you'll find a spring loaded 510 for an MVP, its also push fitted so you'll have a hell of a job getting an "Original" look; the best you can hope for is to find a bolt in connector and put up with the slightly heath robinson look. Frankly by the time you've bought a 510 connector, had it posted, had the mod posted to whoever will fix it, paid for the repair (even if you only give them the price of a pint), had it posted back again you might as well just buy a new one!