What's new

Review: Geekvape E100i Kit Pod Mod UK

vapesourcing.UK

Premium Vendor
Joined
Dec 2, 2020
Messages
938
The product to be introduced today is believed to be familiar to some people. The geekvape e100 has been on the market for a while before that, and just recently, the geekvape e100i kit met you in the market again. When it comes to the biggest difference from the previous e-cigarettes, is the performance. Geekvape E100i is powered by a built-in 3000mAh battery, while the previous geekvape e100 is powered by a single external 18650 battery. Therefore, the biggest difference is actually the different replaceability of the battery.

Geekvape E100i is very stable in terms of battery life, and it can still provide a consistent flavour even when the battery is about to run out. From the smart mode, it is still equipped with the smart AS-Chip 3.0 chip for you. The smart mode can better identify the resistance coil and provide the best power output.

Geekvape s e-cigarettes are always equipped with better protection measures for the device, IP68 three-proof technology so that geekvape e100i can be perfectly protected in any harsh environment. The 4.5ml E100 Pod can prolong the enjoyment time and reduce the injection frequency of e-liquid. The top airflow adjustment system makes the inhalation smoother and unimpeded.
geekvape-e100-kit_(3).jpg


If you need a device with strong battery life, then the geekvape e100i kit will not disappoint you. We have prepared more for you in christmas vape deals 2022, which is definitely worth your attention.

More related product recommendations:
caliburn ak3
rincoe jellybox xs
 
Last edited:
Afternoon all!

Just picked myself up an E100 kit and very impressed by the build.

Am based in UK and noticed on the above article it mentions 4.5ml but as far as I can tell the tank I’ve received is 2ml as per the box/manual.

The tank appears to have a plastic divider within it, I’m unsure about it as it looks to only be filling half the tank! Should I be removing the plastic filler?

I cant see any way to access it to remove the divider so I’m thinking it’s a UK regulations thing. Just wondered if anyone has also seen this and has any recommendations for removing it?

Or is there something I’m missing with regard to taking the tank apart?

I’ve got a couple of photos and I’ll all the videos I’ve seen of the kit the tank looks clear and full all around it.

My worry being that two of the coil parts that are supposed to be soaking up liquid are exposed and not submerged. Any thoughts or help welcome!
 
Afternoon all!

Just picked myself up an E100 kit and very impressed by the build.

Am based in UK and noticed on the above article it mentions 4.5ml but as far as I can tell the tank I’ve received is 2ml as per the box/manual.

The tank appears to have a plastic divider within it, I’m unsure about it as it looks to only be filling half the tank! Should I be removing the plastic filler?

I cant see any way to access it to remove the divider so I’m thinking it’s a UK regulations thing. Just wondered if anyone has also seen this and has any recommendations for removing it?

Or is there something I’m missing with regard to taking the tank apart?

I’ve got a couple of photos and I’ll all the videos I’ve seen of the kit the tank looks clear and full all around it.

My worry being that two of the coil parts that are supposed to be soaking up liquid are exposed and not submerged. Any thoughts or help welcome!

Sadly buying from uk will have a limiter bung inside the tank to make it 2ml.
if you can take the tank apart then you should be able to remove the plastic bung.
does the outer glass come off as if you can get that off then remove the plastic innards it will make it a 4.5ml tank/pod.

cant find in uk yet so only available from china https://vapesourcing.uk/geekvape-e100-pod-cartridge.html
 
Back
Top Bottom