Searching new sub-ohm tank: need your advice

[OzoreXS]

Hi there folks

So I have a Vaporesso Polar mod coming home, the one from the last Vaporesso giveaway here, and I would like to match up it with a decent sub-ohm tank.

Dunno what color will it be... so it may become a decission point later.

I´m not an RBA guy, just a simple ass; I found my way with stock coils so I´m looking for something similar. As you can read on my signature, is what Im used to.

My options so far, considering it is 25mm max. base mod (AFAIK):

1) As I have TONS of coils in baby format, just buy another compatible tank. I like those coils a lot, so I wouldnt mind purchasing another tank.
My choices in no particular preference:
- Advken Owl
- Geekvape Cerberus
- Hellvape Fat Rabbit or Hellvape Hellbeast
- OBS Cube Tank
- Wotofo Flow Pro Subtank

2) A well known (...or at least popular) not compatible sub-ohm tank. Presumably, this ones are a step ahead in flavour.
- Freemax Fireluke 2 or the M Pro (thx guys for putting in into the game)
- Uwell Valyrian II
- Horizontech Falcon II
- Wotofo nexMesh Sub Ohm tank
- Geekvape Zeus Sub Ohm tank (not sure with this, as it says 26mm at the base. It may overhang too much)
- Vaporesso GTX tank 22 (im amazed by the amount of GTX coils but not sure it it will look too narrow)
- Augvape iNtake Subohm Tank (thx @richierich !)

Some final thoughts:
I know the Fireluke 2 coils are compatible with the Uforce ones. Not really interested on those Voopoos

Falcon 2 seems like it uses same coil format like the Wotofo nexMesh, can anyone confirm this?

Do you know about any other coil compatibility of the Valyrian 2 and the Geekvape Zeus? Seems its not likely

Hard to choose, the more I look the mod and the tanks, the more confusing. Matching the look is hard. Look of the Polar is very linear. what do you think?

Feel free to put your own recommendation over the table.

Thanks in advance and best regards!

FULL SIZE

Some info about the coil options for that tanks (wiki wiki)

Freemax Fireluke 2
TX Series (Tea fiber cotton + 10% cotton):
TX1 SS Mesh: SS316L, 0.12, TC 400ºF~550ºF (Best at 500ºF)
TX1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
TX2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
TNX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
TX3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
TX4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
X Series (Flax cotton + 10% cotton):
X1 Mesh: Kanthal, 0.15, 40-90W (Best at 80W)
X2 Mesh: Kanthal double, 0.20, 40-80W (Best at 70W)
NX2 Mesh: Kanthal double, 0.50, 20-50W (Best at 40W)
X3 Mesh: Kanthal triple, 0.15, 50-90W (Best at 80W)
X4 Mesh: Kanthal Quad, 0.15, 40-80W (Best at 70W)
Others:
The Voopoo UForce 1+2 ones.


Freemax M Pro
M Pro Mesh Series (90% Flax Fiber -Wood Pulp- Cotton and 10% Japanese Organic Cotton Formula):
Quintuple Mesh: Kanthal x5, 0.15, POW 80-100W (Best at 90W)
Quadruple Mesh: Kanthal x4, 0.15, 80-120W (Best at 100W)
Triple Mesh: Kanthal x3, 0.15, 80-110W (Best at 100W)
Double Mesh: Kanthal x2, 0.20, 60-90W (Best at 80W)
Single Mesh: Kanthal x1, 0.15, 40-70W (Best at 65W)
Single Mesh: SS316L, 0.12, POW TC 400ºF~500ºF (Best at 500ºF)
Regular coils:
Kanthal DVC: 0.15, 60-120W
Kanthal DVC: 0.25, 50-100W
Firelock Sextuple: 0.15, 60-140W
Firelock Duodenary: 0.15, 80-180W
Others:
Dont know yet about other compatibilities


Uwell Valyrian II
Main coils:
FeCrAl Quadruple Coil 0.15 Ω = 100-120 W
FeCrAl UN2 Single Meshed Coil 0.32 Ω = 90-100 W
FeCrAl UN2-2 Dual Meshed Coil 0.14 Ω = 80-90W
FeCrAl UN2-3 Triple Meshed Coil 0.16Ω = 90-100W
Others:
Dont know yet about other compatibilities


HorinzonTech Falcon King II
Main coils:
Sector Mesh coil, conical, wood pulp+cotton, 0.14, 70-75W
WTF! just 1 coil!?¿?
Others:
Dont know yet about other compatibilities (maybe the OFRF nexMesh..., need to confirm)


Wotofo/OFRF nexMesh Sub Ohm Tank
Main coils:
nexMESH A1, 0.2 ohms, 75W to 85W, Kanthal A1, Organic Cotton
nexMESH SS316L, 0.15 ohms, 350°F to 540°F, 55W to 75W, Organic Cotton
Others:
Dont know yet about other compatibilities (just the same doubt with Falcon 2)


Geek Vape Zeus Sub ohm tank
Main coils:
MeshZ1: 0.40, Kanthal, 60-70W
MeshZ2: 0.20, Kanthal, 70-80W
Others:
Dont know yet about other compatibilities


Vaporesso GTX Tank 22
Main coils:
GTX 0.2Ω MESH: NiCr, DTL, 45-60W (Best: 55W)
GTX 0.3Ω MESH: NiCr, DTL, 32-45W (Best: 40W)
GTX 0.6Ω MESH: FeCrAI, Restricted DTL, 20-30W (Best: 28W)
GTX 0.8Ω MESH: FeCrAI, Restricted DTL, 12-20W (Best: 18W)
GTX 1.2Ω REGULAR: FeCrAI (Dual-wire) MTL 8-12W (Best: 11W)
GTX 1.2Ω MESH: FeCrAI, MTL 7-11W (Best: 11W)
GTX RBA: FeCrAI, 0.7Ω, Restricted DTL, DIY
Others:
Seems like it takes the Voopoo PNPs (but the other way!, GTX coils wont fit in the Voopoo pods)


Augvape Intake Sub-Ohm Tank:
Main coils:
Intake Mesh: 0.15, Kanthal, 60-75W
Intake Clapton Mesh: 0.20, Kanthal+Nichrome, 60-75W
Others:
Dont know yet about other compatibilities

 

[RAPTOREX]

OEM coils, Freemax Mesh Pro or Falcon II, hands down.

 

[OzoreXS]

OEM coils, Freemax Mesh Pro or Falcon II, hands down.

Definitely, Falcon 2 looks nice and all reviews says marvels about it.
The only thing I dont like the Mesh Pro is the fear of getting the coils discontinued soon!

 

[RichieRich]

Can I throw another into the mix?

I've just received the Augvape Intake Subohm tank today. Thought the Clapton mesh was going to be a gimmick, but it's giving the best of both worlds (mesh and the good old Clapton coil).

Running at 55w it's giving great flavour, and oddly, if I increase the wattage, the only thing that increases is the heat. The flavour stays the same and is pretty good.

 

[Cozy]

Definitely, Falcon 2 looks nice and all reviews says marvels about it.
The only thing I dont like the Mesh Pro is the fear of getting the coils discontinued soon!

Why would you think they would be getting discontinued, from what I've tried I would also say the freemax mesh pro, but I have seen a few raving about the augvape intake on the ecigone FB page

 

[iqon]

Another option if available - if the polar was bought as a full kit it would come with the Baby cascade tank, this uses the "baby" format coils and is a great tank.
A lot better than the fireluke 2. Havent used any other of the tanks youve mentioned.

 

[Cozy]

Theres a freemax mesh pro in the giveaways section, stick your name down you may get lucky

https://www.planetofthevapes.co.uk/forums/index.php?threads/196252/

 

[Mutley1]

OEM coils, Freemax Mesh Pro or Falcon II, hands down.

+ 1 on what he said freemax mesh pro with triple coil..

 

[OzoreXS]

Can I throw another into the mix?

I've just received the Augvape Intake Subohm tank today. Thought the Clapton mesh was going to be a gimmick, but it's giving the best of both worlds (mesh and the good old Clapton coil).

Running at 55w it's giving great flavour, and oddly, if I increase the wattage, the only thing that increases is the heat. The flavour stays the same and is pretty good.

Thanks mate. Lets see if the Polar mod comes in grey or black color. If it is, I will consider seriously it; ... xxxit that fused clapton mesh frankestein stole my heart LOL.
Also, if it comes from Mike Vapes, you know, the guy knows something about vaping

Why would you think they would be getting discontinued, from what I've tried I would also say the freemax mesh pro, but I have seen a few raving about the augvape intake on the ecigone FB page

I did some research a while now, and I couldnt find coils from other manufacturer than Freemax. Seems like it is quite popular here!.
Im putting in on the list.
Coil family looks interesting (but I would prefer to test the TX ones tho)

Another option if available - if the polar was bought as a full kit it would come with the Baby cascade tank, this uses the "baby" format coils and is a great tank.
A lot better than the fireluke 2. Havent used any other of the tanks youve mentioned.

Yep. It came with Cascade SE version. It matches so well with the mod...maybe I should consider that option despite how big it is. Unfortunately, it is discontinued and maybe hard to find.

Theres a freemax mesh pro in the giveaways section, stick your name down you may get lucky

https://www.planetofthevapes.co.uk/forums/index.php?threads/196252/

Thanks for letting me know! Im in. Its done, I cant reject the offer.

+ 1 on what he said freemax mesh pro with triple coil..

Thx for your input too mate

 

[RichieRich]

Thanks mate. Lets see if the Polar mod comes in grey or black color. If it is, I will consider seriously it; ... xxxit that fused clapton mesh frankestein stole my heart LOL.
Also, if it comes from Mike Vapes, you know, the guy knows something about vaping

It looks good too! Ecigone are selling them with the bubble glass too as a bonus