Series RDA

[Alastair Paterson]

Looking for suggestions for an RDA which is dual coil but the coils are inserted in series rather than parallel like most RDA's on the market.

I do have one which is the Uwell Rafael X however the deck is fairly small and it is impossible to get an aftermarket Driptip for it.

 

[SirLugg]

Wismec Neutron is another option. Vaporesso did one too, The Transformer?, summat like that. Vaperz cloud temple 2 also.
You’re after running big wires on a series box?

 

[jsixtysix]

You can get a deck for the Modfather rta like that, in fact I have. iirc the Steamcrave Titan deck can be set up as series too - and converted into an rda.
The Modfather 30mm rda also has a series option.

 

[Alastair Paterson]

Im looking at and RDa which is max 25mm as its to top this
Stratus Series Box Mod By Vaperz Cloud
a 30mm rda on top of this would imho look silly.
im looking at putting in a couple of fused claptons or maybie a framed staple all in Ni80 and wish the coils to be approx 5 wraps each, im aiming for them to ohm out between 0.5ohms and 0.6ohms
currently got my Goon on top with some 28awg*2 32awg KA1 twisted fused claptons and the sheer mass of wire is impacting the ramp up time even with fresh VTC5A batteries in.