Sigelei legend disassemble?

[Bobd]

Does anyone know how to take this apart? Trying to get into the display housing as it's not working. Thanks

 

[Toby LeRôhne]

Its press fitted together, I found this out when I dropped mine though mine is the Diamond Mist Cronus which is a rebranded Legend V2 telescopic.

if you fit a large solid atty/rda/rba on and bend/wiggle it whilst holding the battery tube and the atty it should start to come apart.

Its like removing the chimney from a Kanger coil.

I use one of these to press it back together.

Wilko Speed Clamp 6in at wilko.com

Or just push and wiggle it back together.

 

[Bobd]

Managed to get it apart but ended up pulling the wires off the top cap. Does anyone know if it's the black or white wire that goes on the middle part?

 

[Bobd]

Anyone know which goes where?

 

[Toby LeRôhne]

Just popped mine apart to check, White +ve to 510 center pin, Black -ve.