vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,749
Hey guys. Looking for some decent vape deals? Why not take a look at the Snowwolf Kfeng Kit? And you might feel familiar with if you've used the iStick Rim by Eleaf or the Reax Mini by Aspire. Ok, here we go!
Snowwolf Kfeng Kit consists of the Kfeng Mod and the Mark Tank. Differing from many traditional box mods, the Kfeng Mod has a slim body for excellent ergonomics and an exquisite appearance. Powered by a built-in 2500mAh battery and driven by the IFV Smart chipset, it can fire from 5-80W and allows for a variety of working modes including PWR, TC(NI, TI, SS), and SMART Curve. Charging the battery occurs via a 4.5A Type-C USB port which results in fast charging, and firmware upgrades are finished there as well. For safety, the IFV chipset also comes with a range of safety features such as short-circuit protection, PCB board overheat protection, overcharge protection, low voltage protection.
As for the Mark Tank, it has a capacity of 3ml and can be easily refilled via a slide-open top filling structure. Heating elements included in the box are two 0.3ohm Mark-X Mesh Coils, one is pre-installed and the other is a standby. Thanks to unique coil design, these coils also last longer than traditional coils. As with most sub ohm tanks, the Mark Tank adopts an adjustable bottom airflow system, so it is effortless for you to tailor the airflow to your preference. All in all, the Snowwolf Kfeng is definitely worth every penny!
Where to buy: https://vapesourcing.com/snowwolf-kfeng-kit.html
Parameters
Kfeng Mod
Case Material: metal + plastic
Size: 82mm * 35mm * 30mm
Battery: Internal 2500mAh
Wattage Range: 5-80W
Voltage Output: 0.5~7.5V
Resistance Range: 0.2~3ohm
Connector type: steel 510, a pin is gold-plated, spring-loaded
Colors: Black, Rose Red, Space Gray
Mark Tank
Material: stainless steel + glass
Size: 22mm * 43mm
Wattage Range: 25-35W (Best 30W)
Resistance: 0.3ohm
Capacity: 3ML/2ML
Connector: 510, gold-plated pin
You may also like: aegis boost cena
Snowwolf Kfeng Kit consists of the Kfeng Mod and the Mark Tank. Differing from many traditional box mods, the Kfeng Mod has a slim body for excellent ergonomics and an exquisite appearance. Powered by a built-in 2500mAh battery and driven by the IFV Smart chipset, it can fire from 5-80W and allows for a variety of working modes including PWR, TC(NI, TI, SS), and SMART Curve. Charging the battery occurs via a 4.5A Type-C USB port which results in fast charging, and firmware upgrades are finished there as well. For safety, the IFV chipset also comes with a range of safety features such as short-circuit protection, PCB board overheat protection, overcharge protection, low voltage protection.
As for the Mark Tank, it has a capacity of 3ml and can be easily refilled via a slide-open top filling structure. Heating elements included in the box are two 0.3ohm Mark-X Mesh Coils, one is pre-installed and the other is a standby. Thanks to unique coil design, these coils also last longer than traditional coils. As with most sub ohm tanks, the Mark Tank adopts an adjustable bottom airflow system, so it is effortless for you to tailor the airflow to your preference. All in all, the Snowwolf Kfeng is definitely worth every penny!
Where to buy: https://vapesourcing.com/snowwolf-kfeng-kit.html
Parameters
Kfeng Mod
Case Material: metal + plastic
Size: 82mm * 35mm * 30mm
Battery: Internal 2500mAh
Wattage Range: 5-80W
Voltage Output: 0.5~7.5V
Resistance Range: 0.2~3ohm
Connector type: steel 510, a pin is gold-plated, spring-loaded
Colors: Black, Rose Red, Space Gray
Mark Tank
Material: stainless steel + glass
Size: 22mm * 43mm
Wattage Range: 25-35W (Best 30W)
Resistance: 0.3ohm
Capacity: 3ML/2ML
Connector: 510, gold-plated pin
You may also like: aegis boost cena
