vapesourcing1
Overseas Vendor
- Joined
- Mar 28, 2016
- Messages
- 4,749
Hey guys, are you waiting for the new dynamic condition of Snowwolf? Recently they launched their new product - the Xfeng Baby Kit. As the name implies, it is the small version of the XFeng Kit , consists of Snowwolf Xfeng Baby Mod and Snowwolf Mark Tank. This is a super portable device that not only small in size, but light in weight. It is made by high-quality zine alloy on top and covered with the leather materials both on the front and back side, bringing you the fancy looking and the soft touch feeling.
Xfeng Baby is powered by a single 18650 battery, which is located underneath the top battery cap, which makes battery replacement as simple as possible. On the side of the mod, there are a Type-C charging port, a big fire button, a small LED indicator, and a power selection button to adjust the power level required. For a personalized vape experience, the mod can fire from 5W to 45W, and you can choose from 9 different output settings in this range to get the vapor production you like. Inside the deivice is an IFV80 smart chip, which comes with various safety protections.
The Snowwolf Mark is a sub ohm tank with 2ml juice capacity, uses a 0.3ohm Mark-X coil head with a mesh coil structure. Being devoted into new coil technology, the Mark-X mesh coil can offer you fast heating, long lasting and amazing flavor. The coil works in the range of 25 to 35 watts, but is best used with 30 watts of power. It can operate in a myriad of modes including power, temperature control, and smart curve. In addition, the tank features slide top fill and adjustable bottom airflow control.
Parameters:
Xfeng Baby Mod
Size: 48mm * 77mm * 25mm
Wattage Range: 5~45W
Voltage output: 0.5~7.5V
Resistance Range: 0.2~3ohm
Working Mode: Smart Curve
Support Battery: 1 × 18650
Charging Current: 2A
Charging Interface: USB Type-C
Protections: Short-circuit protection, PCB board overheat protection, overcharge protection, low voltage protection
Mark Tank
Size: 22mm * 43mm
Capacity: 2ml
Wattage Range: 25~35W (best 30W)
Resistance: 0.3ohm
Working Mode: PWR, Nl, TI, SS, Smart Curve
More information you can see https://vapesourcing.com/snowwolf-xfeng-baby-kit.html
You may also like:
wismec ai
Xfeng Baby is powered by a single 18650 battery, which is located underneath the top battery cap, which makes battery replacement as simple as possible. On the side of the mod, there are a Type-C charging port, a big fire button, a small LED indicator, and a power selection button to adjust the power level required. For a personalized vape experience, the mod can fire from 5W to 45W, and you can choose from 9 different output settings in this range to get the vapor production you like. Inside the deivice is an IFV80 smart chip, which comes with various safety protections.
The Snowwolf Mark is a sub ohm tank with 2ml juice capacity, uses a 0.3ohm Mark-X coil head with a mesh coil structure. Being devoted into new coil technology, the Mark-X mesh coil can offer you fast heating, long lasting and amazing flavor. The coil works in the range of 25 to 35 watts, but is best used with 30 watts of power. It can operate in a myriad of modes including power, temperature control, and smart curve. In addition, the tank features slide top fill and adjustable bottom airflow control.
Parameters:
Xfeng Baby Mod
Size: 48mm * 77mm * 25mm
Wattage Range: 5~45W
Voltage output: 0.5~7.5V
Resistance Range: 0.2~3ohm
Working Mode: Smart Curve
Support Battery: 1 × 18650
Charging Current: 2A
Charging Interface: USB Type-C
Protections: Short-circuit protection, PCB board overheat protection, overcharge protection, low voltage protection
Mark Tank
Size: 22mm * 43mm
Capacity: 2ml
Wattage Range: 25~35W (best 30W)
Resistance: 0.3ohm
Working Mode: PWR, Nl, TI, SS, Smart Curve
More information you can see https://vapesourcing.com/snowwolf-xfeng-baby-kit.html
You may also like:
wismec ai
