superram47
Postman
- Joined
- Dec 27, 2014
- Messages
- 289
Hi everyone.
Today I am selling a couple of mods for all you squonkers out there.
First up is my Svapiamo sx350 wooden squonker. It is made of indian rosewood and olive and is powered by a yihi sx350 chip. I have written a short review of this mod elsewhere on this site and it really is a very nice squonker. It has a 22mm catch cup so it fits any size rda's. It has only been used a handful of times since i bought it at the end of April, hence it is in as new condition. The reason for its limited use and subsequent sale is that I didn't want to damage it and it seems a shame not to give it the use it deserves. I paid 179 euros for this with delivery from Italy on top of that. This works out to £128.
Second up is my reo mini 2.1 in a black wrinkle finish. This is an unregulated mod that runs from an 18500mah battery. This is not the low profile version so it only accepts rda's no bigger than 14mm. It has the gold contacts and spring fitted so it is sub ohm ready. Also included are spare bottles, springs and a repair kit with new contacts. This mod has given me superb service since I have had it and has been my daily work mod. However I must add that I have recently damaged this mod. I was cleaning it in the sonic cleaner and one of the little magnets that hold the door on fell out. Being the complete tool that I am, I then preceded to glue it back in the wrong way round. When I realised what I had done I tried to dig the magnet out but it was stuck fast
This has resulted in some ugly scratches around the right hand magnet and a door that is not as secure as it should be. If anyone was to purchase this mod you would have to drill out the magnet and replace it (the right way round lol) and the scratches around the magnet are only visible when the door is open. Apart from the magnet damage this mod works perfectly and is a proper little work horse of a squonker. I paid $151 for this and then another $35 dollars for spares with delivery from usa on top of that. This works out to £119.
I am also throwing in a Chalice 3 clone rda (used once) and a smokeless owl rda (never used) as part of the deal. These cost about £9 each.
I would like £100 for the lot which includes delivery via courier service.
Payment by paypal f&f (please add 4% if paying by paypal goods)
A few pics attached.
Thanks for looking.
Today I am selling a couple of mods for all you squonkers out there.
First up is my Svapiamo sx350 wooden squonker. It is made of indian rosewood and olive and is powered by a yihi sx350 chip. I have written a short review of this mod elsewhere on this site and it really is a very nice squonker. It has a 22mm catch cup so it fits any size rda's. It has only been used a handful of times since i bought it at the end of April, hence it is in as new condition. The reason for its limited use and subsequent sale is that I didn't want to damage it and it seems a shame not to give it the use it deserves. I paid 179 euros for this with delivery from Italy on top of that. This works out to £128.
Second up is my reo mini 2.1 in a black wrinkle finish. This is an unregulated mod that runs from an 18500mah battery. This is not the low profile version so it only accepts rda's no bigger than 14mm. It has the gold contacts and spring fitted so it is sub ohm ready. Also included are spare bottles, springs and a repair kit with new contacts. This mod has given me superb service since I have had it and has been my daily work mod. However I must add that I have recently damaged this mod. I was cleaning it in the sonic cleaner and one of the little magnets that hold the door on fell out. Being the complete tool that I am, I then preceded to glue it back in the wrong way round. When I realised what I had done I tried to dig the magnet out but it was stuck fast
This has resulted in some ugly scratches around the right hand magnet and a door that is not as secure as it should be. If anyone was to purchase this mod you would have to drill out the magnet and replace it (the right way round lol) and the scratches around the magnet are only visible when the door is open. Apart from the magnet damage this mod works perfectly and is a proper little work horse of a squonker. I paid $151 for this and then another $35 dollars for spares with delivery from usa on top of that. This works out to £119.I am also throwing in a Chalice 3 clone rda (used once) and a smokeless owl rda (never used) as part of the deal. These cost about £9 each.
I would like £100 for the lot which includes delivery via courier service.
Payment by paypal f&f (please add 4% if paying by paypal goods)
A few pics attached.
Thanks for looking.
Attachments
Last edited:
