Sub Ohmage...

[mrHAIRYface]

Made a dual coil coming in at about 0.7 ohms and ya know what, it clouds a little more but I wasn't overly impressed, vapor is a bit too warm and I think its probably not my thing. It was dualed with two micro coils, put it this way its not something I'd use as an every day vape so being as I only have one dripper atm maybe its not for me

 

[Merchant]

If it's to warm you probably need bigger air holes. I'm running at .3 ohms at the moment with 2 3mm airholes.

 

[clint]

Made a dual coil coming in at about 0.7 ohms and ya know what, it clouds a little more but I wasn't overly impressed, vapor is a bit too warm and I think its probably not my thing. It was dualed with two micro coils, put it this way its not something I'd use as an every day vape so being as I only have one dripper atm maybe its not for me

I didn't find it for me either. 1.1ohm is the lowest I usually go on a dripper. I'm happy with something that's on a par with a cigarette. I like a fair bit of vapour, but not over the top and I like plenty flavour too, but most importantly for me is the throat hit which tends to get messed up with sub ohms and big air holes. Each to their own tho.

 

[Chegs]

It is your choice,but just because others find a 0.7 ohm gives them all they require doesn't mean you have to go sub-ohm.I have solder-melting on my wiring issues at the moment if I go under 0.8 ish ohms so I simply rewound the dual-coils to get 1.2 ohms,they chuck out bloody good clouds(after I'd drilled so many extra holes the dripper looked like it'd got fecking worms)I'm looking forward to getting my mech mod though as the mod I use was built from an old plastic baccy "tin" and the 18650's I use were recycled laptop batteries(awesome batteries on a slow boat from China by now)so can't really strive for more than about 5 amps max.

 

[simonsays]

I messed on for a while with dual, quad, dragon and diamond coils but to be honest I tend to stick with a single micro coil at about 1.2ohms. Flavour/throat hit and vapour are all excellent and I'm not constantly worrying about my mod melting in my hand. I really believe that airflow and wicking are the key to a good vape rather than super low ohms

 

[Tutterz]

I have a IGO W and UD AGI in dripper mode that I use, the IGO is at .7 ohms with dual micro coils and cotton, airholes drilled out to a mm or so each. To be brutally honest I get better vapour and flavour, as well as a thicker and cooler vape from my AGI with a single 1.2ohm micro coil and a 3ish mm air hole.