Switch caps

[RicModMaker]

If I've got a standard black tactile switch on a board inside a box, I'm assuming there's some nice metals switch caps I can use to go through the enclosure.
I can't find them though and I've been looking for ages. Anyone got any ideas?
I'm after some nice aluminium or stainless caps probably about 8mm and 5mm
Thanks guys.

 

[1000moths]

If I've got a standard black tactile switch on a board inside a box, I'm assuming there's some nice metals switch caps I can use to go through the enclosure.
I can't find them though and I've been looking for ages. Anyone got any ideas?
I'm after some nice aluminium or stainless caps probably about 8mm and 5mm
Thanks guys.

Shapeways maybe?

 

[Loco]

Something like this work for ya? Double cap rivets 6mm cap X 6mm pin height 2 colors Rapid Rivets leather 312 | eBay

Could file down the pin a little, but as its a hollow tube, would be easy to attach over the tactile button.

If its along the right lines, just search double cap rivets for more options

Was planning to use something similar myself if there ever comes a time I can't fit something bigger!

 

[Hammy]

How about something like thishttp://www.ebay.co.uk/itm/1pcs-Black-Stainless-Steel-Fake-Cheater-Ear-Plug-Stud-Stretcher-Earring-Piercing/121347902019?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D28111%26meid%3D0c3332f963724d6c9724e7e613b8dff5%26pid%3D100011%26prg%3D11472%26rk%3D3%26rkt%3D10%26sd%3D351054519462
also in plain stainless

 

[RicModMaker]

Some good suggestions. Thanks guys.
I've ordered some magnets that I think will do the trick too. 4mm wide by 3mm long with a 6x1 inside the enclosure.
Also got some 8 x 3 and 10x1 for a bigger button. Nice, round and shiny and might not have to glue them because they are magnets. I reckon it'll work.