What's new

Tc vaping rx200s

patkel

Initiate
Joined
Jun 4, 2016
Messages
40
Trying tc for a change from wattage i set temp to @460 and leave the watts at 200 but the temp protection kicks in straight away leaving me with a cold flavourless vape do i need to adjust wattage down or temp up dtiving me mad
Thx
 
Did you lock the coil resistance in when it was cold? What wire are you using
 
You need to be using a TC compatible wire or coil head (Ni200, Titanium, or SS316) and you need to have set the COLD resistance of the atomiser before you vape. If you still get a cold weak vape after that you have a wicking problem - TC needs LOTS of juice at the coil for it to work well, if there's not enough juice the coil heats up before it heats any juice that might be deeper in the wick and you get the Temp Protected message...
 
Did you lock the coil resistance in when it was cold? What wire are you using
Yes i locked resistance and im using ni200 pre made only been vaping 4 months unsure about making own coils and juice still a baby at all this
 
watts at 200 but the temp protection kicks in straight away leaving me with a cold flavourless vape

It sounds like the classic symptoms of a wicking problem, but it's possible that smashing the coil with a 200W initial blast is overheating the coil. 200W is never necessary, try turning it down to 50W, that might sort the problem.

What is the build?
 
Back
Top Bottom